Outline ![]()
Files ![]()
loading...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
/**
******************************************************************************
* @file LCD_DSI/LCD_DSI_ULPM_Data/Src/main.c
* @author MCD Application Team
* @brief This example describes how to operate the DSI ULPM (Ultra Low Power Mode)
* on data lane only in a use case with display in WVGA Landscape
* of size (800x480) using the STM32F4xx HAL API and BSP.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "candies_800x480_argb8888.h"
#include <string.h>
#include <stdio.h>
/** @addtogroup STM32F4xx_HAL_Examples
* @{
*/
/** @addtogroup LCD_DSI_ULPM_Data
* @{
*/
/* Private typedef -----------------------------------------------------------*/
extern DSI_HandleTypeDef hdsi_eval;
extern LTDC_HandleTypeDef hltdc_eval;
static DMA2D_HandleTypeDef hdma2d;
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint32_t frameCnt = 0;
char str_display[60] = "";
/* Private function prototypes -----------------------------------------------*/
static void SystemClock_Config(void);
static void OnError_Handler(uint32_t condition);
static uint8_t CheckForUserInput(void);
static void CopyPicture(uint32_t *pSrc, uint32_t *pDst, uint16_t x, uint16_t y, uint16_t xsize, uint16_t ysize);
/* Private functions ---------------------------------------------------------*/
/**
* @brief On Error Handler on condition TRUE.
* @param condition : Can be TRUE or FALSE
* @retval None
*/
static void OnError_Handler(uint32_t condition)
{
if(condition)
{
BSP_LED_On(LED3);
while(1) { ; } /* Blocking on error */
}
}
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
uint8_t lcd_status = LCD_OK;
uint8_t sdram_status = SDRAM_OK;
/* This sample code displays a fixed image 800x480 on LCD KoD in */
/* orientation mode landscape and DSI mode video burst */
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Systick timer is configured by default as source of time base, but user
can eventually implement his proper time base source (a general purpose
timer for example or other time source), keeping in mind that Time base
duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
handled in milliseconds basis.
- Set NVIC Group Priority to 4
- Low Level Initialization: global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 180 MHz */
SystemClock_Config();
/* Initialize MFX */
BSP_IO_Init();
/* Initialize used Leds */
BSP_LED_Init(LED1);
BSP_LED_Init(LED3);
/* Configure Tamper push-button */
BSP_PB_Init(BUTTON_TAMPER, BUTTON_MODE_GPIO);
/* Initialize the SDRAM */
sdram_status = BSP_SDRAM_Init();
OnError_Handler(sdram_status != SDRAM_OK);
/* Initialize the LCD DSI in Video Burst mode with LANDSCAPE orientation */
lcd_status = BSP_LCD_Init();
OnError_Handler(lcd_status != LCD_OK);
/* Program a line event at line 0 */
HAL_LTDC_ProgramLineEvent(&hltdc_eval, 0);
/* Copy texture to be displayed on LCD from Flash to SDRAM */
CopyPicture((uint32_t *)&candies_800x480_argb8888, (uint32_t *)LCD_FB_START_ADDRESS, 0, 0, BSP_LCD_GetXSize(), BSP_LCD_GetYSize());
BSP_LCD_LayerDefaultInit(LTDC_ACTIVE_LAYER_BACKGROUND, LCD_FB_START_ADDRESS);
BSP_LCD_SelectLayer(LTDC_ACTIVE_LAYER_BACKGROUND);
/* Prepare area to display frame number in the image displayed on LCD */
BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
BSP_LCD_FillRect(0, 400, BSP_LCD_GetXSize(), 80);
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
BSP_LCD_SetFont(&Font16);
/* Display title */
BSP_LCD_DisplayStringAt(0, 420, (uint8_t *) "LCD_DSI_ULPM_Data example", CENTER_MODE);
BSP_LCD_DisplayStringAt(0, 440, (uint8_t *) "Press TAMPER button to enter ULPM", CENTER_MODE);
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
BSP_LCD_SetFont(&Font16);
/* Infinite loop */
while (1)
{
/* Clear previous line */
BSP_LCD_ClearStringLine(460);
/* New text to display */
sprintf(str_display, ">> Frame Nb : %lu", frameCnt);
/* Print updated frame number */
BSP_LCD_DisplayStringAt(0, 460, (uint8_t *)str_display, CENTER_MODE);
if (CheckForUserInput() > 0)
{
/* Display Off with ULPM management Data lane only integrated */
BSP_LCD_DisplayOff();
HAL_Delay(100);
/* Switch Off DSI_CR_EN bit */
__HAL_DSI_DISABLE(&hdsi_eval);
/* Switch Off LTDCEN bit */
__HAL_LTDC_DISABLE(&hltdc_eval);
/* Enter ultra low power mode (data lane only integrated) */
HAL_DSI_EnterULPMData(&hdsi_eval);
BSP_LED_On(LED1);
HAL_Delay(2000);
BSP_LCD_ClearStringLine(440);
BSP_LCD_DisplayStringAt(0, 440, (uint8_t *) " Exited ULPM with success - Press To enter Again ULPM. ", CENTER_MODE);
/* Exit ultra low power mode (data lane only integrated) */
HAL_DSI_ExitULPMData(&hdsi_eval);
BSP_LED_Off(LED1);
/* Switch On LTDCEN bit */
__HAL_LTDC_ENABLE(&hltdc_eval);
/* Switch On DSI_CR_EN bit */
__HAL_DSI_ENABLE(&hdsi_eval);
/* Display On with ULPM exit Data lane only integrated */
BSP_LCD_DisplayOn();
}
}
}
/**
* @brief Check for user input.
* @param None
* @retval Input state (1 : active / 0 : Inactive)
*/
static uint8_t CheckForUserInput(void)
{
if(BSP_PB_GetState(BUTTON_TAMPER) == GPIO_PIN_RESET)
{
HAL_Delay(10);
do
{
/* Clear previous line */
BSP_LCD_ClearStringLine(460);
/* New text to display */
sprintf(str_display, ">> Frame Nb : %lu", frameCnt);
/* Print updated frame number */
BSP_LCD_DisplayStringAt(0, 460, (uint8_t *)str_display, CENTER_MODE);
} while (BSP_PB_GetState(BUTTON_TAMPER) == GPIO_PIN_RESET);
return 1 ;
}
return 0;
}
/**
* @brief Line Event callback.
* @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
* the configuration information for the LTDC.
* @retval None
*/
void HAL_LTDC_LineEventCallback(LTDC_HandleTypeDef *hltdc)
{
/* Increment frame count */
frameCnt++;
HAL_LTDC_ProgramLineEvent(hltdc, 0);
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 180000000
* HCLK(Hz) = 180000000
* AHB Prescaler = 1
* APB1 Prescaler = 4
* APB2 Prescaler = 2
* HSE Frequency(Hz) = 25000000
* PLL_M = 25
* PLL_N = 360
* PLL_P = 2
* PLL_Q = 7
* PLL_R = 6
* VDD(V) = 3.3
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 5
* @param None
* @retval None
*/
static void SystemClock_Config(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
HAL_StatusTypeDef ret = HAL_OK;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 25;
RCC_OscInitStruct.PLL.PLLN = 360;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
RCC_OscInitStruct.PLL.PLLR = 6;
ret = HAL_RCC_OscConfig(&RCC_OscInitStruct);
if(ret != HAL_OK)
{
while(1) { ; }
}
/* Activate the OverDrive to reach the 180 MHz Frequency */
ret = HAL_PWREx_EnableOverDrive();
if(ret != HAL_OK)
{
while(1) { ; }
}
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
if(ret != HAL_OK)
{
while(1) { ; }
}
}
/**
* @brief Converts a line to an ARGB8888 pixel format.
* @param pSrc: Pointer to source buffer
* @param pDst: Output color
* @param xSize: Buffer width
* @param ColorMode: Input color mode
* @retval None
*/
static void CopyPicture(uint32_t *pSrc, uint32_t *pDst, uint16_t x, uint16_t y, uint16_t xsize, uint16_t ysize)
{
uint32_t destination = (uint32_t)pDst + (y * 800 + x) * 4;
uint32_t source = (uint32_t)pSrc;
/*##-1- Configure the DMA2D Mode, Color Mode and output offset #############*/
hdma2d.Init.Mode = DMA2D_M2M;
hdma2d.Init.ColorMode = DMA2D_ARGB8888;
hdma2d.Init.OutputOffset = 800 - xsize;
/*##-2- DMA2D Callbacks Configuration ######################################*/
hdma2d.XferCpltCallback = NULL;
/*##-3- Foreground Configuration ###########################################*/
hdma2d.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA;
hdma2d.LayerCfg[1].InputAlpha = 0xFF;
hdma2d.LayerCfg[1].InputColorMode = DMA2D_INPUT_ARGB8888;
hdma2d.LayerCfg[1].InputOffset = 0;
hdma2d.Instance = DMA2D;
/* DMA2D Initialization */
if(HAL_DMA2D_Init(&hdma2d) == HAL_OK)
{
if(HAL_DMA2D_ConfigLayer(&hdma2d, 1) == HAL_OK)
{
if (HAL_DMA2D_Start(&hdma2d, source, destination, xsize, ysize) == HAL_OK)
{
/* Polling For DMA transfer */
HAL_DMA2D_PollForTransfer(&hdma2d, 100);
}
}
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/**
* @}
*/
/**
* @}
*/
Details ![]()
Show: from Types: Columns: ![]( "Show Project Names")
![]( "Show Locations")
![]( "Show Referring Symbols")
![]( "Show Scope")
This file uses the notable symbols shown below. Click anywhere in the file to view more details.