SourceVu will show references to HAL_DMA2D_Init() from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
HAL_DMA2D_Init() function
Initialize the DMA2D according to the specified parameters in the DMA2D_InitTypeDef and create the associated handle.
Syntax
Implemented in ![]()
stm32f4xx_hal_dma2d.c:238
Return value
HAL status
Related Functions
Found 31 other functions taking a ![]()
__DMA2D_HandleTypeDef
argument:
Function
Description
Configure the DMA2D Layer according to the specified parameters in the DMA2D_HandleTypeDef.
Polling for transfer complete or CLUT loading.
Start the DMA2D Transfer.
Initializes the DMA2D MSP.
DeInitializes the DMA2D MSP.
Handle DMA2D interrupt request.
Start the DMA2D Transfer with interrupt enabled.
Start the multi-source DMA2D Transfer with interrupt enabled.
Set the DMA2D transfer parameters.
Abort the DMA2D CLUT loading.
Transfer watermark callback.
CLUT Transfer Complete callback.
Return the DMA2D state
Abort the DMA2D Transfer.
Start DMA2D CLUT Loading with interrupt enabled.
Suspend the DMA2D CLUT loading.
Resume the DMA2D CLUT loading.
Configure the DMA2D CLUT Transfer.
Configure the line watermark.
Enable DMA2D dead time feature.
Disable DMA2D dead time feature.
Configure dead time.
Return the DMA2D error code
Deinitializes the DMA2D peripheral registers to their default reset values.
Start the multi-source DMA2D Transfer.
Suspend the DMA2D Transfer.
Resume the DMA2D Transfer.
Enable the DMA2D CLUT Transfer.
Start DMA2D CLUT Loading.
Start DMA2D CLUT Loading with interrupt enabled.
Start DMA2D CLUT Loading.