HAL_DMA2D_Start_IT() function

Pointer to a DMA2D_HandleTypeDef structure that contains the configuration information for the DMA2D.

Configure the source memory Buffer address if the Memory-to-Memory or Memory-to-Memory with pixel format conversion mode is selected, or configure the color value if Register-to-Memory mode is selected.

The destination memory Buffer address.

The width of data to be transferred from source to destination (expressed in number of pixels per line).

The height of data to be transferred from source to destination (expressed in number of lines).

Initialize the DMA2D according to the specified parameters in the DMA2D_InitTypeDef and create the associated handle.

Configure the DMA2D Layer according to the specified parameters in the DMA2D_HandleTypeDef.

Polling for transfer complete or CLUT loading.

Start the DMA2D Transfer.

Initializes the DMA2D MSP.

DeInitializes the DMA2D MSP.

Handle DMA2D interrupt request.

Start the multi-source DMA2D Transfer with interrupt enabled.

Set the DMA2D transfer parameters.

Abort the DMA2D CLUT loading.

Transfer watermark callback.

CLUT Transfer Complete callback.

Return the DMA2D state

Abort the DMA2D Transfer.

Start DMA2D CLUT Loading with interrupt enabled.

Suspend the DMA2D CLUT loading.

Resume the DMA2D CLUT loading.

Configure the DMA2D CLUT Transfer.

Configure the line watermark.

Enable DMA2D dead time feature.

Disable DMA2D dead time feature.

Configure dead time.

Return the DMA2D error code

Deinitializes the DMA2D peripheral registers to their default reset values.

Start the multi-source DMA2D Transfer.

Suspend the DMA2D Transfer.

Resume the DMA2D Transfer.

Enable the DMA2D CLUT Transfer.

Start DMA2D CLUT Loading.

Start DMA2D CLUT Loading with interrupt enabled.

Start DMA2D CLUT Loading.