Src/main.c (LCD_DSI_CmdMode_PartialRefresh)

Outline

Includes

#include "main.h"

#include "image_320x240_argb8888.h"

#include "life_augmented_argb8888.h"

#include <string.h>

#include <stdio.h>

Private typedef

hdma2d

Private define

#define VSYNC

#define VBP

#define VFP

#define VACT

#define HSYNC

#define HBP

#define HFP

#define HACT

#define LAYER0_ADDRESS

#define INVALID_AREA

#define LEFT_AREA

#define RIGHT_AREA

Private variables

pending_buffer

active_area

ImageIndex

Images

pColLeft

pColRight

pPage

pSyncLeft

Private function prototypes

OnError_Handler(uint32_t)

main()

HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *)

SystemClock_Config()

LCD_Init()

LTDC_Init()

LCD_LayertInit(uint16_t, uint32_t)

LCD_BriefDisplay()

CopyPicture(uint32_t *, uint32_t *, uint16_t, uint16_t, uint16_t, uint16_t)

Files

SourceVuSTM32 Libraries and SamplesLCD_DSI_CmdMode_PartialRefreshSrc/main.c

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

278

279

280

281

282

283

284

285

286

287

288

289

290

291

292

293

294

295

296

297

298

299

300

301

302

303

304

305

306

307

308

309

310

311

312

313

314

315

316

317

318

319

320

321

322

323

324

325

326

327

328

329

330

331

332

333

334

335

336

337

338

339

340

341

342

343

344

345

346

347

348

349

350

351

352

353

354

355

356

357

358

359

360

361

362

363

364

365

366

367

368

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

446

447

448

449

450

451

452

453

454

455

456

457

458

459

460

461

462

463

464

465

466

467

468

469

470

471

472

473

474

475

476

477

478

479

480

481

482

483

484

485

486

487

488

489

490

491

492

493

494

495

496

497

498

499

500

501

502

503

504

505

506

507

508

509

510

511

512

513

514

515

516

517

518

519

520

521

522

523

524

525

526

527

528

529

530

531

532

533

534

535

536

537

538

539

540

541

542

543

544

545

546

547

548

549

550

551

552

553

554

555

556

557

558

559

560

561

562

563

564

565

566

567

568

569

570

571

572

573

574

575

576

577

578

579

580

581

582

583

584

585

586

/** ****************************************************************************** * @file LCD_DSI/LCD_DSI_CmdMode_PartialRefresh/Src/main.c * @author MCD Application Team * @brief This example describes how to configure and use LCD DSI to display an image * of size WVGA in mode landscape (800x480) using the STM32F4xx HAL API and BSP. ****************************************************************************** * @attention * * Copyright (c) 2017 STMicroelectronics. * All rights reserved. * * This software is licensed under terms that can be found in the LICENSE file * in the root directory of this software component. * If no LICENSE file comes with this software, it is provided AS-IS. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "main.h" #include "image_320x240_argb8888.h" #include "life_augmented_argb8888.h" #include <string.h> #include <stdio.h> /** @addtogroup STM32F4xx_HAL_Examples * @{ */ /** @addtogroup LCD_DSI_Video_OneLayer * @{ */ /* Private typedef -----------------------------------------------------------*/ extern LTDC_HandleTypeDef hltdc_eval; static DMA2D_HandleTypeDef hdma2d; extern DSI_HandleTypeDef hdsi_eval; /* Private define ------------------------------------------------------------*/ #define VSYNC 1 #define VBP 1 #define VFP 1 #define VACT 480 #define HSYNC 1 #define HBP 1 #define HFP 1 #define HACT 400 /* !!!! SCREEN DIVIDED INTO 2 AREAS !!!! */ #define LAYER0_ADDRESS (LCD_FB_START_ADDRESS) #define INVALID_AREA 0 #define LEFT_AREA 1 #define RIGHT_AREA 2 /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ static int32_t pending_buffer = -1; static int32_t active_area = INVALID_AREA; static uint32_t ImageIndex = 0; static const uint32_t * Images[] = { image_320x240_argb8888, life_augmented_argb8888, }; uint8_t pColLeft[] = {0x00, 0x00, 0x01, 0x8F}; /* 0 -> 399 */ uint8_t pColRight[] = {0x01, 0x90, 0x03, 0x1F}; /* 400 -> 799 */ uint8_t pPage[] = {0x00, 0x00, 0x01, 0xDF}; /* 0 -> 479 */ uint8_t pSyncLeft[] = {0x02, 0x15}; /* Scan @ 533 */ /* Private function prototypes -----------------------------------------------*/ static void SystemClock_Config(void); static void OnError_Handler(uint32_t condition); static void CopyPicture(uint32_t *pSrc, uint32_t *pDst, uint16_t x, uint16_t y, uint16_t xsize, uint16_t ysize); static uint8_t LCD_Init(void); void LCD_LayertInit(uint16_t LayerIndex, uint32_t Address); void LTDC_Init(void); static void LCD_BriefDisplay(void); /* Private functions ---------------------------------------------------------*/ /** * @brief On Error Handler on condition TRUE. * @param condition : Can be TRUE or FALSE * @retval None */ static void OnError_Handler(uint32_t condition) { if(condition) { BSP_LED_On(LED3); while(1) { ; } /* Blocking on error */ } } /** * @brief Main program * @param None * @retval None */ int main(void) { uint8_t lcd_status = LCD_OK; /* STM32F4xx HAL library initialization: - Configure the Flash prefetch, instruction and Data caches - Systick timer is configured by default as source of time base, but user can eventually implement his proper time base source (a general purpose timer for example or other time source), keeping in mind that Time base duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and handled in milliseconds basis. - Set NVIC Group Priority to 4 - Low Level Initialization: global MSP (MCU Support Package) initialization */ HAL_Init(); /* Configure the system clock to 180 MHz */ SystemClock_Config(); /* Initialize the SDRAM */ BSP_SDRAM_Init(); /* Initialize the LCD */ lcd_status = LCD_Init(); OnError_Handler(lcd_status != LCD_OK); /* Initialize LTDC layer 0 iused for Hint */ LCD_LayertInit(0, LAYER0_ADDRESS); BSP_LCD_SelectLayer(0); HAL_DSI_LongWrite(&hdsi_eval, 0, DSI_DCS_LONG_PKT_WRITE, 4, OTM8009A_CMD_CASET, pColLeft); HAL_DSI_LongWrite(&hdsi_eval, 0, DSI_DCS_LONG_PKT_WRITE, 4, OTM8009A_CMD_PASET, pPage); /* Update pitch : the draw is done on the whole physical X Size */ HAL_LTDC_SetPitch(&hltdc_eval, BSP_LCD_GetXSize(), 0); /* Display example brief */ LCD_BriefDisplay(); /* Show first image */ CopyPicture((uint32_t *)Images[ImageIndex++], (uint32_t *)LAYER0_ADDRESS, 240, 160, 320, 240); pending_buffer = 0; active_area = LEFT_AREA; HAL_DSI_LongWrite(&hdsi_eval, 0, DSI_DCS_LONG_PKT_WRITE, 2, OTM8009A_CMD_WRTESCN, pSyncLeft); /* Infinite loop */ while (1) { if(pending_buffer < 0) { CopyPicture((uint32_t *)Images[ImageIndex++], (uint32_t *)LAYER0_ADDRESS, 240, 160, 320, 240); if(ImageIndex >= 2) { ImageIndex = 0; } pending_buffer = 1; HAL_DSI_LongWrite(&hdsi_eval, 0, DSI_DCS_LONG_PKT_WRITE, 2, OTM8009A_CMD_WRTESCN, pSyncLeft); } /* Wait some time before switching to next image */ HAL_Delay(2000); } } /** * @brief End of Refresh DSI callback. * @param hdsi: pointer to a DSI_HandleTypeDef structure that contains * the configuration information for the DSI. * @retval None */ void HAL_DSI_EndOfRefreshCallback(DSI_HandleTypeDef *hdsi) { if(pending_buffer >= 0) { if(active_area == LEFT_AREA) { /* Mask the TE */ HAL_DSI_ShortWrite(hdsi, 0, DSI_DCS_SHORT_PKT_WRITE_P1, OTM8009A_CMD_TEOFF, 0x00); /* Disable DSI Wrapper */ __HAL_DSI_WRAPPER_DISABLE(&hdsi_eval); /* Update LTDC configuration */ LTDC_LAYER(&hltdc_eval, 0)->CFBAR = LAYER0_ADDRESS + 400 * 4; __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(&hltdc_eval); /* Enable DSI Wrapper */ __HAL_DSI_WRAPPER_ENABLE(&hdsi_eval); HAL_DSI_LongWrite(hdsi, 0, DSI_DCS_LONG_PKT_WRITE, 4, OTM8009A_CMD_CASET, pColRight); /* Refresh the right part of the display */ HAL_DSI_Refresh(hdsi); } else if(active_area == RIGHT_AREA) { /* Disable DSI Wrapper */ __HAL_DSI_WRAPPER_DISABLE(&hdsi_eval); /* Update LTDC configuration */ LTDC_LAYER(&hltdc_eval, 0)->CFBAR = LAYER0_ADDRESS; __HAL_LTDC_RELOAD_IMMEDIATE_CONFIG(&hltdc_eval); /* Enable DSI Wrapper */ __HAL_DSI_WRAPPER_ENABLE(&hdsi_eval); HAL_DSI_LongWrite(hdsi, 0, DSI_DCS_LONG_PKT_WRITE, 4, OTM8009A_CMD_CASET, pColLeft); pending_buffer = -1; } } active_area = (active_area == LEFT_AREA)? RIGHT_AREA : LEFT_AREA; } /** * @brief System Clock Configuration * The system Clock is configured as follow : * System Clock source = PLL (HSE) * SYSCLK(Hz) = 180000000 * HCLK(Hz) = 180000000 * AHB Prescaler = 1 * APB1 Prescaler = 4 * APB2 Prescaler = 2 * HSE Frequency(Hz) = 8000000 * PLL_M = 8 * PLL_N = 360 * PLL_P = 2 * PLL_Q = 7 * PLL_R = 6 * VDD(V) = 3.3 * Main regulator output voltage = Scale1 mode * Flash Latency(WS) = 5 * @param None * @retval None */ static void SystemClock_Config(void) { RCC_ClkInitTypeDef RCC_ClkInitStruct; RCC_OscInitTypeDef RCC_OscInitStruct; HAL_StatusTypeDef ret = HAL_OK; /* Enable Power Control clock */ __HAL_RCC_PWR_CLK_ENABLE(); /* The voltage scaling allows optimizing the power consumption when the device is clocked below the maximum system frequency, to update the voltage scaling value regarding system frequency refer to product datasheet. */ __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); /* Enable HSE Oscillator and activate PLL with HSE as source */ RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; #if defined(USE_STM32469I_DISCO_REVA) RCC_OscInitStruct.PLL.PLLM = 25; #else RCC_OscInitStruct.PLL.PLLM = 8; #endif /* USE_STM32469I_DISCO_REVA */ RCC_OscInitStruct.PLL.PLLN = 360; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; RCC_OscInitStruct.PLL.PLLQ = 7; RCC_OscInitStruct.PLL.PLLR = 6; ret = HAL_RCC_OscConfig(&RCC_OscInitStruct); if(ret != HAL_OK) { while(1) { ; } } /* Activate the OverDrive to reach the 180 MHz Frequency */ ret = HAL_PWREx_EnableOverDrive(); if(ret != HAL_OK) { while(1) { ; } } /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */ RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2); RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; ret = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); if(ret != HAL_OK) { while(1) { ; } } } /** * @brief Initializes the DSI LCD. * The ititialization is done as below: * - DSI PLL ititialization * - DSI ititialization * - LTDC ititialization * - OTM8009A LCD Display IC Driver ititialization * @param None * @retval LCD state */ static uint8_t LCD_Init(void) { static DSI_PHY_TimerTypeDef PhyTimings; static DSI_CmdCfgTypeDef CmdCfg; static DSI_LPCmdTypeDef LPCmd; static DSI_PLLInitTypeDef dsiPllInit; static RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; /* Toggle Hardware Reset of the DSI LCD using * its XRES signal (active low) */ BSP_LCD_Reset(); /* Call first MSP Initialize only in case of first initialization * This will set IP blocks LTDC, DSI and DMA2D * - out of reset * - clocked * - NVIC IRQ related to IP blocks enabled */ BSP_LCD_MspInit(); /* LCD clock configuration */ /* PLLSAI_VCO Input = HSE_VALUE/PLL_M = 1 Mhz */ /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN = 417 Mhz */ /* PLLLCDCLK = PLLSAI_VCO Output/PLLSAIR = 417 MHz / 5 = 83.4 MHz */ /* LTDC clock frequency = PLLLCDCLK / LTDC_PLLSAI_DIVR_2 = 83.4 / 2 = 41.7 MHz */ PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_LTDC; PeriphClkInitStruct.PLLSAI.PLLSAIN = 417; PeriphClkInitStruct.PLLSAI.PLLSAIR = 5; PeriphClkInitStruct.PLLSAIDivR = RCC_PLLSAIDIVR_2; HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct); /* Base address of DSI Host/Wrapper registers to be set before calling De-Init */ hdsi_eval.Instance = DSI; HAL_DSI_DeInit(&(hdsi_eval)); #if defined(USE_STM32469I_DISCO_REVA) dsiPllInit.PLLNDIV = 100; dsiPllInit.PLLIDF = DSI_PLL_IN_DIV5; #else dsiPllInit.PLLNDIV = 125; dsiPllInit.PLLIDF = DSI_PLL_IN_DIV2; #endif /* USE_STM32469I_DISCO_REVA */ dsiPllInit.PLLODF = DSI_PLL_OUT_DIV1; hdsi_eval.Init.NumberOfLanes = DSI_TWO_DATA_LANES; hdsi_eval.Init.TXEscapeCkdiv = 0x4; HAL_DSI_Init(&(hdsi_eval), &(dsiPllInit)); /* Configure the DSI for Command mode */ CmdCfg.VirtualChannelID = 0; CmdCfg.HSPolarity = DSI_HSYNC_ACTIVE_HIGH; CmdCfg.VSPolarity = DSI_VSYNC_ACTIVE_HIGH; CmdCfg.DEPolarity = DSI_DATA_ENABLE_ACTIVE_HIGH; CmdCfg.ColorCoding = DSI_RGB888; CmdCfg.CommandSize = HACT; CmdCfg.TearingEffectSource = DSI_TE_DSILINK; CmdCfg.TearingEffectPolarity = DSI_TE_RISING_EDGE; CmdCfg.VSyncPol = DSI_VSYNC_FALLING; CmdCfg.AutomaticRefresh = DSI_AR_ENABLE; CmdCfg.TEAcknowledgeRequest = DSI_TE_ACKNOWLEDGE_ENABLE; HAL_DSI_ConfigAdaptedCommandMode(&hdsi_eval, &CmdCfg); LPCmd.LPGenShortWriteNoP = DSI_LP_GSW0P_ENABLE; LPCmd.LPGenShortWriteOneP = DSI_LP_GSW1P_ENABLE; LPCmd.LPGenShortWriteTwoP = DSI_LP_GSW2P_ENABLE; LPCmd.LPGenShortReadNoP = DSI_LP_GSR0P_ENABLE; LPCmd.LPGenShortReadOneP = DSI_LP_GSR1P_ENABLE; LPCmd.LPGenShortReadTwoP = DSI_LP_GSR2P_ENABLE; LPCmd.LPGenLongWrite = DSI_LP_GLW_ENABLE; LPCmd.LPDcsShortWriteNoP = DSI_LP_DSW0P_ENABLE; LPCmd.LPDcsShortWriteOneP = DSI_LP_DSW1P_ENABLE; LPCmd.LPDcsShortReadNoP = DSI_LP_DSR0P_ENABLE; LPCmd.LPDcsLongWrite = DSI_LP_DLW_ENABLE; HAL_DSI_ConfigCommand(&hdsi_eval, &LPCmd); /* Configure DSI PHY HS2LP and LP2HS timings */ PhyTimings.ClockLaneHS2LPTime = 35; PhyTimings.ClockLaneLP2HSTime = 35; PhyTimings.DataLaneHS2LPTime = 35; PhyTimings.DataLaneLP2HSTime = 35; PhyTimings.DataLaneMaxReadTime = 0; PhyTimings.StopWaitTime = 10; HAL_DSI_ConfigPhyTimer(&hdsi_eval, &PhyTimings); /* Initialize LTDC */ LTDC_Init(); /* Start DSI */ HAL_DSI_Start(&(hdsi_eval)); #if defined (USE_STM32469I_DISCO_REVC) /* Initialize the NT35510 LCD Display IC Driver (3K138 LCD IC Driver) */ NT35510_Init(NT35510_FORMAT_RGB888, LCD_ORIENTATION_LANDSCAPE); #else /* Initialize the OTM8009A LCD Display IC Driver (KoD LCD IC Driver)*/ OTM8009A_Init(OTM8009A_COLMOD_RGB888, LCD_ORIENTATION_LANDSCAPE); #endif /* Reconfigure the DSI for HS Command mode */ LPCmd.LPGenShortWriteNoP = DSI_LP_GSW0P_DISABLE; LPCmd.LPGenShortWriteOneP = DSI_LP_GSW1P_DISABLE; LPCmd.LPGenShortWriteTwoP = DSI_LP_GSW2P_DISABLE; LPCmd.LPGenShortReadNoP = DSI_LP_GSR0P_DISABLE; LPCmd.LPGenShortReadOneP = DSI_LP_GSR1P_DISABLE; LPCmd.LPGenShortReadTwoP = DSI_LP_GSR2P_DISABLE; LPCmd.LPGenLongWrite = DSI_LP_GLW_DISABLE; LPCmd.LPDcsShortWriteNoP = DSI_LP_DSW0P_DISABLE; LPCmd.LPDcsShortWriteOneP = DSI_LP_DSW1P_DISABLE; LPCmd.LPDcsShortReadNoP = DSI_LP_DSR0P_DISABLE; LPCmd.LPDcsLongWrite = DSI_LP_DLW_DISABLE; HAL_DSI_ConfigCommand(&hdsi_eval, &LPCmd); HAL_DSI_ConfigFlowControl(&hdsi_eval, DSI_FLOW_CONTROL_BTA); /* Refresh the display */ HAL_DSI_Refresh(&hdsi_eval); return LCD_OK; } /** * @brief Initialize the LTDC * @param None * @retval None */ void LTDC_Init(void) { /* DeInit */ hltdc_eval.Instance = LTDC; HAL_LTDC_DeInit(&hltdc_eval); /* LTDC Config */ /* Timing and polarity */ hltdc_eval.Init.HorizontalSync = HSYNC; hltdc_eval.Init.VerticalSync = VSYNC; hltdc_eval.Init.AccumulatedHBP = HSYNC+HBP; hltdc_eval.Init.AccumulatedVBP = VSYNC+VBP; hltdc_eval.Init.AccumulatedActiveH = VSYNC+VBP+VACT; hltdc_eval.Init.AccumulatedActiveW = HSYNC+HBP+HACT; hltdc_eval.Init.TotalHeigh = VSYNC+VBP+VACT+VFP; hltdc_eval.Init.TotalWidth = HSYNC+HBP+HACT+HFP; /* background value */ hltdc_eval.Init.Backcolor.Blue = 0; hltdc_eval.Init.Backcolor.Green = 0; hltdc_eval.Init.Backcolor.Red = 0; /* Polarity */ hltdc_eval.Init.HSPolarity = LTDC_HSPOLARITY_AL; hltdc_eval.Init.VSPolarity = LTDC_VSPOLARITY_AL; hltdc_eval.Init.DEPolarity = LTDC_DEPOLARITY_AL; hltdc_eval.Init.PCPolarity = LTDC_PCPOLARITY_IPC; hltdc_eval.Instance = LTDC; HAL_LTDC_Init(&hltdc_eval); } /** * @brief Initializes the LCD layers. * @param LayerIndex: Layer foreground or background * @param FB_Address: Layer frame buffer * @retval None */ void LCD_LayertInit(uint16_t LayerIndex, uint32_t Address) { LCD_LayerCfgTypeDef Layercfg; /* Layer Init */ Layercfg.WindowX0 = 0; Layercfg.WindowX1 = BSP_LCD_GetXSize()/2; Layercfg.WindowY0 = 0; Layercfg.WindowY1 = BSP_LCD_GetYSize(); Layercfg.PixelFormat = LTDC_PIXEL_FORMAT_ARGB8888; Layercfg.FBStartAdress = Address; Layercfg.Alpha = 255; Layercfg.Alpha0 = 0; Layercfg.Backcolor.Blue = 0; Layercfg.Backcolor.Green = 0; Layercfg.Backcolor.Red = 0; Layercfg.BlendingFactor1 = LTDC_BLENDING_FACTOR1_PAxCA; Layercfg.BlendingFactor2 = LTDC_BLENDING_FACTOR2_PAxCA; Layercfg.ImageWidth = BSP_LCD_GetXSize()/2; Layercfg.ImageHeight = BSP_LCD_GetYSize(); HAL_LTDC_ConfigLayer(&hltdc_eval, &Layercfg, LayerIndex); } /** * @brief Display Example description. * @param None * @retval None */ static void LCD_BriefDisplay(void) { BSP_LCD_SetFont(&Font24); BSP_LCD_SetTextColor(LCD_COLOR_BLUE); BSP_LCD_FillRect(0, 0, 800, 112); BSP_LCD_SetTextColor(LCD_COLOR_WHITE); BSP_LCD_FillRect(0, 112, 800, 368); BSP_LCD_SetBackColor(LCD_COLOR_BLUE); BSP_LCD_DisplayStringAtLine(1, (uint8_t *)" LCD_DSI_CmdMode_PartialRefresh"); BSP_LCD_SetFont(&Font16); BSP_LCD_DisplayStringAtLine(4, (uint8_t *)"This example shows how to display images on LCD DSI using the partial"); BSP_LCD_DisplayStringAtLine(5, (uint8_t *)"Refresh method by splitting the display area."); } /** * @brief Converts a line to an ARGB8888 pixel format. * @param pSrc: Pointer to source buffer * @param pDst: Output color * @param xSize: Buffer width * @param ColorMode: Input color mode * @retval None */ static void CopyPicture(uint32_t *pSrc, uint32_t *pDst, uint16_t x, uint16_t y, uint16_t xsize, uint16_t ysize) { uint32_t destination = (uint32_t)pDst + (y * 800 + x) * 4; uint32_t source = (uint32_t)pSrc; /*##-1- Configure the DMA2D Mode, Color Mode and output offset #############*/ hdma2d.Init.Mode = DMA2D_M2M; hdma2d.Init.ColorMode = DMA2D_ARGB8888; hdma2d.Init.OutputOffset = 800 - xsize; /*##-2- DMA2D Callbacks Configuration ######################################*/ hdma2d.XferCpltCallback = NULL; /*##-3- Foreground Configuration ###########################################*/ hdma2d.LayerCfg[1].AlphaMode = DMA2D_NO_MODIF_ALPHA; hdma2d.LayerCfg[1].InputAlpha = 0xFF; hdma2d.LayerCfg[1].InputColorMode = DMA2D_INPUT_ARGB8888; hdma2d.LayerCfg[1].InputOffset = 0; hdma2d.Instance = DMA2D; /* DMA2D Initialization */ if(HAL_DMA2D_Init(&hdma2d) == HAL_OK) { if(HAL_DMA2D_ConfigLayer(&hdma2d, 1) == HAL_OK) { if (HAL_DMA2D_Start(&hdma2d, source, destination, xsize, ysize) == HAL_OK) { /* Polling For DMA transfer */ HAL_DMA2D_PollForTransfer(&hdma2d, 100); } } } } #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * @param file: pointer to the source file name * @param line: assert_param error line source number * @retval None */ void assert_failed(uint8_t *file, uint32_t line) { /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* Infinite loop */ while (1) { } } #endif /** * @} */ /** * @} */

Details