Outline ![]()
Files ![]()
loading...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
/**
******************************************************************************
* @file stm32446e_eval_sdram.c
* @author MCD Application Team
* @brief This file includes the SDRAM driver for the MT48LC4M32B2B5-7 memory
* device mounted on STM32446E-EVAL evaluation board.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* File Info : -----------------------------------------------------------------
User NOTES
1. How To use this driver:
--------------------------
- This driver is used to drive the MT48LC4M32B2B5-7 SDRAM external memory mounted
on STM32446E-EVAL evaluation board.
- This driver does not need a specific component driver for the SDRAM device
to be included with.
2. Driver description:
---------------------
+ Initialization steps:
o Initialize the SDRAM external memory using the BSP_SDRAM_Init() function. This
function includes the MSP layer hardware resources initialization and the
FMC controller configuration to interface with the external SDRAM memory.
o It contains the SDRAM initialization sequence to program the SDRAM external
device using the function BSP_SDRAM_Initialization_sequence(). Note that this
sequence is standard for all SDRAM devices, but can include some differences
from a device to another. If it is the case, the right sequence should be
implemented separately.
+ SDRAM read/write operations
o SDRAM external memory can be accessed with read/write operations once it is
initialized.
Read/write operation can be performed with AHB access using the functions
BSP_SDRAM_ReadData()/BSP_SDRAM_WriteData(), or by DMA transfer using the functions
BSP_SDRAM_ReadData_DMA()/BSP_SDRAM_WriteData_DMA().
o The AHB access is performed with 16-bit width transaction, the DMA transfer
configuration is fixed at single (no burst) halfword transfer (see the
BSP_SDRAM_MspInit() __weak function).
o User can implement his own functions for read/write access with his desired
configurations.
o If interrupt mode is used for DMA transfer, the function BSP_SDRAM_DMA_IRQHandler()
is called in IRQ handler file, to serve the generated interrupt once the DMA
transfer is complete.
o You can send a command to the SDRAM device in runtime using the function
BSP_SDRAM_Sendcmd(), and giving the desired command as parameter chosen between
the predefined commands of the "FMC_SDRAM_CommandTypeDef" structure.
------------------------------------------------------------------------------*/
/* Includes ------------------------------------------------------------------*/
#include "stm32446e_eval_sdram.h"
/** @addtogroup BSP
* @{
*/
/** @addtogroup STM32446E_EVAL
* @{
*/
/** @defgroup STM32446E_EVAL_SDRAM STM32446E EVAL SDRAM
* @{
*/
/** @defgroup STM32446E_EVAL_SDRAM_Private_Types_Definitions STM32446E EVAL SDRAM Private Types Definitions
* @{
*/
/**
* @}
*/
/** @defgroup STM32446E_EVAL_SDRAM_Private_Defines STM32446E EVAL SDRAM Private Defines
* @{
*/
/**
* @}
*/
/** @defgroup STM32446E_EVAL_SDRAM_Private_Macros STM32446E EVAL SDRAM Private Macros
* @{
*/
/**
* @}
*/
/** @defgroup STM32446E_EVAL_SDRAM_Private_Variables STM32446E EVAL SDRAM Private Variables
* @{
*/
static SDRAM_HandleTypeDef sdramHandle;
static FMC_SDRAM_TimingTypeDef Timing;
static FMC_SDRAM_CommandTypeDef Command;
/**
* @}
*/
/** @defgroup STM32446E_EVAL_SDRAM_Private_Function_Prototypes STM32446E EVAL SDRAM Private Function Prototypes
* @{
*/
/**
* @}
*/
/** @defgroup STM32446E_EVAL_SDRAM_Private_Functions STM32446E EVAL SDRAM Private Functions
* @{
*/
/**
* @brief Initializes the SDRAM device.
* @retval SDRAM status
*/
uint8_t BSP_SDRAM_Init(void)
{
static uint8_t sdramstatus = SDRAM_ERROR;
/* SDRAM device configuration */
sdramHandle.Instance = FMC_SDRAM_DEVICE;
/* Timing configuration for 90Mhz as SD clock frequency (System clock is up to 180Mhz */
Timing.LoadToActiveDelay = 2;
Timing.ExitSelfRefreshDelay = 7;
Timing.SelfRefreshTime = 4;
Timing.RowCycleDelay = 7;
Timing.WriteRecoveryTime = 2;
Timing.RPDelay = 2;
Timing.RCDDelay = 2;
sdramHandle.Init.SDBank = FMC_SDRAM_BANK1;
sdramHandle.Init.ColumnBitsNumber = FMC_SDRAM_COLUMN_BITS_NUM_8;
sdramHandle.Init.RowBitsNumber = FMC_SDRAM_ROW_BITS_NUM_12;
sdramHandle.Init.MemoryDataWidth = SDRAM_MEMORY_WIDTH;
sdramHandle.Init.InternalBankNumber = FMC_SDRAM_INTERN_BANKS_NUM_4;
sdramHandle.Init.CASLatency = FMC_SDRAM_CAS_LATENCY_2;
sdramHandle.Init.WriteProtection = FMC_SDRAM_WRITE_PROTECTION_DISABLE;
sdramHandle.Init.SDClockPeriod = SDCLOCK_PERIOD;
sdramHandle.Init.ReadBurst = FMC_SDRAM_RBURST_ENABLE;
sdramHandle.Init.ReadPipeDelay = FMC_SDRAM_RPIPE_DELAY_0;
/* SDRAM controller initialization */
BSP_SDRAM_MspInit(&sdramHandle, NULL); /* __weak function can be rewritten by the applic */
if(HAL_SDRAM_Init(&sdramHandle, &Timing) != HAL_OK)
{
sdramstatus = SDRAM_ERROR;
}
else
{
sdramstatus = SDRAM_OK;
}
/* SDRAM initialization sequence */
BSP_SDRAM_Initialization_sequence(REFRESH_COUNT);
return sdramstatus;
}
/**
* @brief DeInitializes the SDRAM device.
* @retval SDRAM status
*/
uint8_t BSP_SDRAM_DeInit(void)
{
static uint8_t sdramstatus = SDRAM_ERROR;
/* SDRAM device configuration */
sdramHandle.Instance = FMC_SDRAM_DEVICE;
if(HAL_SDRAM_DeInit(&sdramHandle) != HAL_OK)
{
sdramstatus = SDRAM_ERROR;
}
else
{
sdramstatus = SDRAM_OK;
}
/* SDRAM controller initialization */
BSP_SDRAM_MspDeInit(&sdramHandle, NULL);
return sdramstatus;
}
/**
* @brief Programs the SDRAM device.
* @param RefreshCount: SDRAM refresh counter value
*/
void BSP_SDRAM_Initialization_sequence(uint32_t RefreshCount)
{
__IO uint32_t tmpmrd = 0;
/* Step 1: Configure a clock configuration enable command */
Command.CommandMode = FMC_SDRAM_CMD_CLK_ENABLE;
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command.AutoRefreshNumber = 1;
Command.ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
/* Step 2: Insert 100 us minimum delay */
/* Inserted delay is equal to 1 ms due to systick time base unit (ms) */
HAL_Delay(1);
/* Step 3: Configure a PALL (precharge all) command */
Command.CommandMode = FMC_SDRAM_CMD_PALL;
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command.AutoRefreshNumber = 1;
Command.ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
/* Step 4: Configure an Auto Refresh command */
Command.CommandMode = FMC_SDRAM_CMD_AUTOREFRESH_MODE;
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command.AutoRefreshNumber = 8;
Command.ModeRegisterDefinition = 0;
/* Send the command */
HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
/* Step 5: Program the external memory mode register */
tmpmrd = (uint32_t)SDRAM_MODEREG_BURST_LENGTH_1 |\
SDRAM_MODEREG_BURST_TYPE_SEQUENTIAL |\
SDRAM_MODEREG_CAS_LATENCY_2 |\
SDRAM_MODEREG_OPERATING_MODE_STANDARD |\
SDRAM_MODEREG_WRITEBURST_MODE_SINGLE;
Command.CommandMode = FMC_SDRAM_CMD_LOAD_MODE;
Command.CommandTarget = FMC_SDRAM_CMD_TARGET_BANK1;
Command.AutoRefreshNumber = 1;
Command.ModeRegisterDefinition = tmpmrd;
/* Send the command */
HAL_SDRAM_SendCommand(&sdramHandle, &Command, SDRAM_TIMEOUT);
/* Step 6: Set the refresh rate counter */
/* Set the device refresh rate */
HAL_SDRAM_ProgramRefreshRate(&sdramHandle, RefreshCount);
}
/**
* @brief Reads an mount of data from the SDRAM memory in polling mode.
* @param uwStartAddress: Read start address
* @param pData: Pointer to data to be read
* @param uwDataSize: Size of read data from the memory
* @retval SDRAM status
*/
uint8_t BSP_SDRAM_ReadData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
{
if(HAL_SDRAM_Read_32b(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
{
return SDRAM_ERROR;
}
else
{
return SDRAM_OK;
}
}
/**
* @brief Reads an mount of data from the SDRAM memory in DMA mode.
* @param uwStartAddress: Read start address
* @param pData: Pointer to data to be read
* @param uwDataSize: Size of read data from the memory
* @retval SDRAM status
*/
uint8_t BSP_SDRAM_ReadData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
{
if(HAL_SDRAM_Read_DMA(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
{
return SDRAM_ERROR;
}
else
{
return SDRAM_OK;
}
}
/**
* @brief Writes an mount of data to the SDRAM memory in polling mode.
* @param uwStartAddress: Write start address
* @param pData: Pointer to data to be written
* @param uwDataSize: Size of written data from the memory
* @retval SDRAM status
*/
uint8_t BSP_SDRAM_WriteData(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
{
if(HAL_SDRAM_Write_32b(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
{
return SDRAM_ERROR;
}
else
{
return SDRAM_OK;
}
}
/**
* @brief Writes an mount of data to the SDRAM memory in DMA mode.
* @param uwStartAddress: Write start address
* @param pData: Pointer to data to be written
* @param uwDataSize: Size of written data from the memory
* @retval SDRAM status
*/
uint8_t BSP_SDRAM_WriteData_DMA(uint32_t uwStartAddress, uint32_t *pData, uint32_t uwDataSize)
{
if(HAL_SDRAM_Write_DMA(&sdramHandle, (uint32_t *)uwStartAddress, pData, uwDataSize) != HAL_OK)
{
return SDRAM_ERROR;
}
else
{
return SDRAM_OK;
}
}
/**
* @brief Sends command to the SDRAM bank.
* @param SdramCmd: Pointer to SDRAM command structure
* @retval HAL status
*/
uint8_t BSP_SDRAM_Sendcmd(FMC_SDRAM_CommandTypeDef *SdramCmd)
{
if(HAL_SDRAM_SendCommand(&sdramHandle, SdramCmd, SDRAM_TIMEOUT) != HAL_OK)
{
return SDRAM_ERROR;
}
else
{
return SDRAM_OK;
}
}
/**
* @brief Handles SDRAM DMA transfer interrupt request.
*/
void BSP_SDRAM_DMA_IRQHandler(void)
{
HAL_DMA_IRQHandler(sdramHandle.hdma);
}
/**
* @brief Initializes SDRAM MSP.
* @param hsdram: SDRAM handle
* @param Params: pointer on additional configuration parameters, can be NULL.
*/
__weak void BSP_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram, void *Params)
{
static DMA_HandleTypeDef dma_handle;
GPIO_InitTypeDef gpio_init_structure;
/* Enable FMC clock */
__HAL_RCC_FMC_CLK_ENABLE();
/* Enable chosen DMAx clock */
__DMAx_CLK_ENABLE();
/* Enable GPIOs clock */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
/* Common GPIO configuration */
gpio_init_structure.Mode = GPIO_MODE_AF_PP;
gpio_init_structure.Pull = GPIO_PULLUP;
gpio_init_structure.Speed = GPIO_SPEED_FAST;
gpio_init_structure.Alternate = GPIO_AF12_FMC;
/* GPIOA configuration */
gpio_init_structure.Pin = GPIO_PIN_7;
HAL_GPIO_Init(GPIOA, &gpio_init_structure);
/* GPIOC configuration */
gpio_init_structure.Pin = GPIO_PIN_5 | GPIO_PIN_4;
HAL_GPIO_Init(GPIOC, &gpio_init_structure);
/* GPIOD configuration */
gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_8| GPIO_PIN_9 | GPIO_PIN_10 |\
GPIO_PIN_14 | GPIO_PIN_15;
HAL_GPIO_Init(GPIOD, &gpio_init_structure);
/* GPIOE configuration */
gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_7| GPIO_PIN_8 | GPIO_PIN_9 |\
GPIO_PIN_10 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\
GPIO_PIN_15;
HAL_GPIO_Init(GPIOE, &gpio_init_structure);
/* GPIOF configuration */
gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_2| GPIO_PIN_3 | GPIO_PIN_4 |\
GPIO_PIN_5 | GPIO_PIN_11 | GPIO_PIN_12 | GPIO_PIN_13 | GPIO_PIN_14 |\
GPIO_PIN_15;
HAL_GPIO_Init(GPIOF, &gpio_init_structure);
/* GPIOG configuration */
gpio_init_structure.Pin = GPIO_PIN_0 | GPIO_PIN_1 | GPIO_PIN_4| GPIO_PIN_5 | GPIO_PIN_8 |\
GPIO_PIN_15 | GPIO_PIN_2;
HAL_GPIO_Init(GPIOG, &gpio_init_structure);
/* Configure common DMA parameters */
dma_handle.Init.Channel = SDRAM_DMAx_CHANNEL;
dma_handle.Init.Direction = DMA_MEMORY_TO_MEMORY;
dma_handle.Init.PeriphInc = DMA_PINC_ENABLE;
dma_handle.Init.MemInc = DMA_MINC_ENABLE;
dma_handle.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
dma_handle.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
dma_handle.Init.Mode = DMA_NORMAL;
dma_handle.Init.Priority = DMA_PRIORITY_HIGH;
dma_handle.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
dma_handle.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
dma_handle.Init.MemBurst = DMA_MBURST_SINGLE;
dma_handle.Init.PeriphBurst = DMA_PBURST_SINGLE;
dma_handle.Instance = SDRAM_DMAx_STREAM;
/* Associate the DMA handle */
__HAL_LINKDMA(hsdram, hdma, dma_handle);
/* Deinitialize the stream for new transfer */
HAL_DMA_DeInit(&dma_handle);
/* Configure the DMA stream */
HAL_DMA_Init(&dma_handle);
/* NVIC configuration for DMA transfer complete interrupt */
HAL_NVIC_SetPriority(SDRAM_DMAx_IRQn, 5, 0);
HAL_NVIC_EnableIRQ(SDRAM_DMAx_IRQn);
}
/**
* @brief DeInitializes SDRAM MSP.
* @param hsdram: SDRAM handle
* @param Params: pointer on additional configuration parameters, can be NULL.
*/
__weak void BSP_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram, void *Params)
{
static DMA_HandleTypeDef dma_handle;
/* Disable NVIC configuration for DMA interrupt */
HAL_NVIC_DisableIRQ(SDRAM_DMAx_IRQn);
/* Deinitialize the stream for new transfer */
dma_handle.Instance = SDRAM_DMAx_STREAM;
HAL_DMA_DeInit(&dma_handle);
/* DeInit GPIO pins can be done in the application
(by surcharging this __weak function) */
/* GPIO pins clock, FMC clock and DMA clock can be shut down in the application
by surcharging this __weak function */
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
Details ![]()
Show: from Types: Columns: ![]( "Show Project Names")
![]( "Show Locations")
![]( "Show Referring Symbols")
![]( "Show Scope")
This file uses the notable symbols shown below. Click anywhere in the file to view more details.