SourceVu will show references to HAL_SDRAM_SendCommand() from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
HAL_SDRAM_SendCommand() function
Sends Command to the SDRAM bank.
Syntax
HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram,
FMC_SDRAM_CommandTypeDef *Command,
uint32_t Timeout);
Implemented in ![]()
stm32f4xx_hal_sdram.c:1076
Return value
HAL status
Related Functions
Found 20 other functions taking a ![]()
SDRAM_HandleTypeDef
argument:
Function
Description
Performs the SDRAM device initialization sequence.
Programs the SDRAM Memory Refresh rate.
SDRAM MSP Init.
SDRAM MSP DeInit.
Writes a Words data buffer to SDRAM memory using DMA transfer.
Reads 32-bit data buffer from the SDRAM memory.
Writes 32-bit data buffer to SDRAM memory.
Reads a Words data from the SDRAM memory using DMA transfer.
Perform the SDRAM device initialization sequence.
Disables dynamically SDRAM write protection.
SDRAM Refresh error callback.
Enables dynamically SDRAM write protection.
Sets the Number of consecutive SDRAM Memory auto Refresh commands.
Returns the SDRAM memory current mode.
Returns the SDRAM state.
This function handles SDRAM refresh error interrupt request.
Reads 8-bit data buffer from the SDRAM memory.
Writes 8-bit data buffer to SDRAM memory.
Reads 16-bit data buffer from the SDRAM memory.
Writes 16-bit data buffer to SDRAM memory.