Outline ![]()
Files ![]()
loading...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
/**
******************************************************************************
* @file BSP/Src/main.c
* @author MCD Application Team
* @brief This example code shows how to use the STM32469I BSP Drivers
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "stlogo.h"
/** @addtogroup STM32F4xx_HAL_Examples
* @{
*/
/** @addtogroup BSP
* @{
*/
/* Private typedef -----------------------------------------------------------*/
typedef enum
{
TOUCHSCREEN_DEMO1_INDEX = 0,
TOUCHSCREEN_DEMO2_INDEX = 1,
TOUCHSCREEN_DEMO3_INDEX = 2,
LCD_DEMO_INDEX = 3,
AUDIO_RECORD_INDEX = 4,
AUDIO_PLAY_INDEX = 5,
SD_DEMO_INDEX = 6,
LCD_LOG_DEMO_INDEX = 7,
SDRAM_DEMO_INDEX = 8,
SDRAM_DMA_DEMO_INDEX = 9,
SRAM_DEMO_INDEX = 10,
EEPROM_DEMO_INDEX = 11,
QSPI_DEMO_INDEX = 12,
ANIMATION_DEMO_INDEX = 13,
MAX_DEMO_INDEX = 14
} BSP_DemoIndexTypedef;
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
uint8_t DemoIndex = 0;
uint8_t CurrDemoIndex = 0; /* Current executing demo index */
uint8_t NbLoop = 1;
volatile uint8_t exti2_received = 0;
volatile uint8_t exti5_received = 0;
LCD_OrientationTypeDef lcd_display_orientation = LCD_ORIENTATION_INVALID;
/* Global extern variables ---------------------------------------------------*/
uint8_t mfx_toggle_led = 0;
/* Private function prototypes -----------------------------------------------*/
static void SystemClock_Config(void);
static void Display_DemoDescription(void);
BSP_DemoTypedef BSP_examples[]=
{
{Touchscreen_demo1, "TOUCHSCREEN DEMO 1", 0},
#if (TS_MULTI_TOUCH_SUPPORTED == 1)
{Touchscreen_demo2, "TOUCHSCREEN DEMO 2", 1},
#endif
{LCD_demo, "LCD", 0},
{AudioPlay_demo, "AUDIO PLAY", 0},
{SD_demo, "mSD", 0},
{Log_demo, "LCD LOG", 0},
{SDRAM_demo, "SDRAM", 0},
{SDRAM_DMA_demo, "SDRAM DMA", 0},
{EEPROM_demo, "EEPROM", 0},
{QSPI_demo, "QSPI", 0},
{Animation_demo, "ANIMATION", 0}
};
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
uint8_t lcd_status = LCD_OK;
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the clocks to nominal values */
SystemClock_Config();
BSP_LED_Init(LED1);
BSP_LED_Init(LED2);
BSP_LED_Init(LED3);
BSP_LED_Init(LED4);
/* Configure the User Button in GPIO Mode */
BSP_PB_Init(BUTTON_USER, BUTTON_MODE_GPIO);
/* Initialize DSI LCD */
lcd_status = BSP_LCD_Init();
BSP_TEST_APPLI_ASSERT(lcd_status != LCD_OK);
BSP_LCD_LayerDefaultInit(0, LCD_FB_START_ADDRESS);
BSP_LCD_SelectLayer(0);
if(BSP_LCD_GetXSize() > BSP_LCD_GetYSize())
{
lcd_display_orientation = LCD_ORIENTATION_LANDSCAPE;
}
else
{
lcd_display_orientation = LCD_ORIENTATION_PORTRAIT;
}
Display_DemoDescription();
/* Wait For User inputs */
while (1)
{
if ( mfx_toggle_led == 1)
{
BSP_LED_Toggle(LED1);
BSP_LED_Toggle(LED2);
BSP_LED_Toggle(LED3);
BSP_LED_Toggle(LED4);
mfx_toggle_led = 0;
}
if(BSP_PB_GetState(BUTTON_USER) == PB_RESET)
{
HAL_Delay(10);
while (BSP_PB_GetState(BUTTON_USER) == PB_RESET) { ; }
/* Current executing demo index */
CurrDemoIndex = DemoIndex;
BSP_examples[DemoIndex++].DemoFunc();
if(DemoIndex >= COUNT_OF_EXAMPLE(BSP_examples))
{
/* Increment number of loops */
NbLoop++;
DemoIndex = 0;
}
Display_DemoDescription();
} /* of if(BSP_PB_GetState(BUTTON_USER) == PB_RESET) */
} /* of while (1) */
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 180000000
* HCLK(Hz) = 180000000
* AHB Prescaler = 1
* APB1 Prescaler = 4
* APB2 Prescaler = 2
* HSE Frequency(Hz) = 8000000
* PLL_M = 8
* PLL_N = 360
* PLL_P = 2
* PLL_Q = 7
* PLL_R = 6
* VDD(V) = 3.3
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 5
* @param None
* @retval None
*/
static void SystemClock_Config(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
HAL_StatusTypeDef hal_status = HAL_OK;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
#if defined(USE_STM32469I_DISCO_REVA)
RCC_OscInitStruct.PLL.PLLM = 25;
#else
RCC_OscInitStruct.PLL.PLLM = 8;
#endif /* USE_STM32469I_DISCO_REVA */
RCC_OscInitStruct.PLL.PLLN = 360;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; /* to have ck_pll = 360 MHz / 2 = 180 MHz */
RCC_OscInitStruct.PLL.PLLQ = 7;
RCC_OscInitStruct.PLL.PLLR = 6; /* to have ck_plllcd = 60 MHz : replace DPHY PLL clock when this PLL is Off in ULPM mode */
hal_status = HAL_RCC_OscConfig(&RCC_OscInitStruct);
BSP_TEST_APPLI_ASSERT(hal_status != HAL_OK);
/* Activate the Over-Drive mode */
hal_status = HAL_PWREx_EnableOverDrive();
BSP_TEST_APPLI_ASSERT(hal_status != HAL_OK);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK |
RCC_CLOCKTYPE_HCLK |
RCC_CLOCKTYPE_PCLK1 |
RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
/* Set nominal timing configurations for STM32F469xx */
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; /* f(hclk) = 180 MHz / 1 = 180 MHz */
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; /* f(pclk1) = f(hclk)/4 = 180/4 = 45 MHz */
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; /* f(pclk2) = f(hclk)/2 = 90 MHz */
/* Set Flash latency parameters (wait states) depending on CPU clock = ck_sys = 180 MHz */
hal_status = HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
BSP_TEST_APPLI_ASSERT(hal_status != HAL_OK);
}
/**
* @brief Display main demo messages.
* @param None
* @retval None
*/
static void Display_DemoDescription(void)
{
uint8_t desc[58];
BSP_LCD_SetFont(&LCD_DEFAULT_FONT);
/* Clear the LCD */
BSP_LCD_SetBackColor(LCD_COLOR_WHITE);
BSP_LCD_Clear(LCD_COLOR_WHITE);
/* Set the LCD Text Color */
BSP_LCD_SetTextColor(LCD_COLOR_DARKBLUE);
/* Display LCD messages */
BSP_LCD_DisplayStringAt(0, 30, (uint8_t *)"STM32F469I_DISCO BSP", CENTER_MODE);
BSP_LCD_DisplayStringAt(0, 55, (uint8_t *)"Drivers examples", CENTER_MODE);
/* Draw Bitmap */
BSP_LCD_DrawBitmap((BSP_LCD_GetXSize() - 80)/2, 125, (uint8_t *)stlogo);
BSP_LCD_SetFont(&Font16);
BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()- 40, (uint8_t *)"Copyright (c) STMicroelectronics 2016", CENTER_MODE);
BSP_LCD_SetFont(&Font16);
BSP_LCD_SetTextColor(LCD_COLOR_BLUE);
BSP_LCD_FillRect(0, BSP_LCD_GetYSize()/2 + 15, BSP_LCD_GetXSize(), 60);
BSP_LCD_SetTextColor(LCD_COLOR_WHITE);
BSP_LCD_SetBackColor(LCD_COLOR_BLUE);
BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 30, (uint8_t *)"Press User Button to start :", CENTER_MODE);
sprintf((char *)desc,"%s example", BSP_examples[DemoIndex].DemoName);
BSP_LCD_DisplayStringAt(0, BSP_LCD_GetYSize()/2 + 45, (uint8_t *)desc, CENTER_MODE);
}
/**
* @brief Check for user input.
* @param None
* @retval Input state (1 : active / 0 : Inactive)
*/
uint8_t CheckForUserInput(void)
{
if(BSP_PB_GetState(BUTTON_USER) == PB_RESET)
{
HAL_Delay(10);
while (BSP_PB_GetState(BUTTON_USER) == PB_RESET);
return 1 ;
}
return 0;
}
/**
* @brief Toggle Leds.
* @param None
* @retval None
*/
void Toggle_Leds(void)
{
static uint32_t ticks = 0;
if (ticks++ > 1000)
{
mfx_toggle_led = 1;
ticks = 0;
}
}
/**
* @brief EXTI line detection callbacks.
* @param GPIO_Pin: Specifies the pins connected EXTI line
* @retval None
*/
void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
{
static uint32_t debounce_time = 0;
if (GPIO_Pin == USER_BUTTON_PIN)
{
/* Prevent debounce effect for user key */
if ((HAL_GetTick() - debounce_time) > 50)
{
debounce_time = HAL_GetTick();
}
/*function to be completed by else {} */
}
if (GPIO_Pin == TS_INT_PIN)
{
/* Communication with TS is done via I2C.
Often the sw requires ISRs (interrupt service routines) to be quick while communication
with I2C can be considered relatively long (depending on SW requirements).
Considering that the TS feature don�t need immediate reaction,
it is suggested to use polling mode instead of EXTI mode,
in order to avoid blocking I2C communication on interrupt service routines */
/* Here an example of implementation is proposed which is a mix between pooling and exit mode:
On ISR a flag is set (exti5_received), the main loop polls on the flag rather then polling the TS;
Mcu communicates with TS only when the flag has been set by ISR. This is just an example:
the users should choose they strategy depending on their application needs.*/
exti5_received = 1;
}
if (GPIO_Pin == SD_DETECT_PIN)
{
/* Communication with SD is done via I2C.
Often the sw requires ISRs (interrupt service routines) to be quick while communication
with I2C can be considered relatively long (depending on SW requirements).
Considering that the SD feature don�t need immediate reaction,
it is suggested to use polling mode instead of EXTI mode,
in order to avoid blocking I2C communication on interrupt service routines */
/* Here an example of implementation is proposed which is a mix between pooling and exit mode:
On ISR a flag is set (exti2_received), the main loop polls on the flag rather then polling the sd;
Mcu communicates with sd only when the flag has been set by ISR. This is just an example:
the users should choose they strategy depending on their application needs.*/
exti2_received = 1;
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif /* USE_FULL_ASSERT */
/**
* @}
*/
/**
* @}
*/
Details ![]()
Show: from Types: Columns: ![]( "Show Project Names")
![]( "Show Locations")
![]( "Show Referring Symbols")
![]( "Show Scope")
This file uses the notable symbols shown below. Click anywhere in the file to view more details.