Outline ![]()
Files ![]()
loading (1/5)...
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
/**
******************************************************************************
* @file FreeRTOS/FreeRTOS_LowPower/Src/main.c
* @author MCD Application Team
* @brief Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "cmsis_os.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
#define blckqSTACK_SIZE configMINIMAL_STACK_SIZE
#define QUEUE_SIZE (uint32_t) 1
/* Private variables ---------------------------------------------------------*/
osMessageQId osQueue;
/* The number of items the queue can hold. This is 1 as the Rx task will
remove items as they are added so the Tx task should always find the queue
empty. */
#define QUEUE_LENGTH (1)
/* The rate at which the Tx task sends to the queue. */
#define TX_DELAY (500)
/* The value that is sent from the Tx task to the Rx task on the queue. */
#define QUEUED_VALUE (100)
/* The length of time the LED will remain on for. It is on just long enough
to be able to see with the human eye so as not to distort the power readings too
much. */
#define LED_TOGGLE_DELAY (20)
/* Private function prototypes -----------------------------------------------*/
static void QueueReceiveThread(const void *argument);
static void QueueSendThread(const void *argument);
static void GPIO_ConfigAN(void);
static void SystemClock_Config(void);
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* STM32F4xx HAL library initialization:
- Configure the Flash prefetch, instruction and Data caches
- Configure the Systick to generate an interrupt each 1 msec
- Set NVIC Group Priority to 4
- Global MSP (MCU Support Package) initialization
*/
HAL_Init();
/* Configure the system clock to 168 MHz */
SystemClock_Config();
/* Configure GPIO's to AN to reduce power consumption */
GPIO_ConfigAN();
/* Configure LED1 */
BSP_LED_Init(LED1);
/* Create the queue used by the two threads */
osMessageQDef(osqueue, QUEUE_LENGTH, uint16_t);
osQueue = osMessageCreate (osMessageQ(osqueue), NULL);
/* Note the Tx has a lower priority than the Rx when the threads are
spawned. */
osThreadDef(RxThread, QueueReceiveThread, osPriorityNormal, 0, configMINIMAL_STACK_SIZE);
osThreadCreate(osThread(RxThread), NULL);
osThreadDef(TxThread, QueueSendThread, osPriorityBelowNormal, 0, configMINIMAL_STACK_SIZE);
osThreadCreate(osThread(TxThread), NULL);
/* Start scheduler */
osKernelStart();
/* We should never get here as control is now taken by the scheduler */
for(;;);
}
/**
* @brief Message Queue Producer Thread.
* @param argument: Not used
* @retval None
*/
static void QueueSendThread (const void *argument)
{
for(;;)
{
/* Place this thread into the blocked state until it is time to run again.
The kernel will place the MCU into the Retention low power sleep state
when the idle thread next runs. */
osDelay(TX_DELAY);
/* Send to the queue - causing the queue receive thread to flash its LED.
It should not be necessary to block on the queue send because the Rx
thread will already have removed the last queued item. */
osMessagePut(osQueue, (uint32_t)QUEUED_VALUE, 0);
}
}
/**
* @brief Message Queue Consumer Thread.
* @param argument: Not used
* @retval None
*/
static void QueueReceiveThread(const void *argument)
{
osEvent event;
for(;;)
{
/* Wait until something arrives in the queue. */
event = osMessageGet(osQueue, osWaitForever);
/* To get here something must have arrived, but is it the expected
value? If it is, turn the LED on for a short while. */
if(event.status == osEventMessage)
{
if(event.value.v == QUEUED_VALUE)
{
BSP_LED_On(LED1);
osDelay(LED_TOGGLE_DELAY);
BSP_LED_Off(LED1);
}
}
}
}
/**
* @brief MCU Pre Sleep process.
* @param ulExpectedIdleTime: Not used
* @retval None
*/
void PreSleepProcessing(uint32_t ulExpectedIdleTime)
{
/* Called by the kernel before it places the MCU into a sleep mode because
configPRE_SLEEP_PROCESSING() is #defined to PreSleepProcessing().
NOTE: Additional actions can be taken here to get the power consumption
even lower. For example, peripherals can be turned off here, and then back
on again in the post sleep processing function. For maximum power saving
ensure all unused pins are in their lowest power state. */
/* Avoid compiler warnings about the unused parameter. */
(void) ulExpectedIdleTime;
/* Disable the peripheral clock during Low Power (Sleep) mode.*/
__HAL_RCC_GPIOG_CLK_SLEEP_DISABLE();
}
/**
* @brief MCU Post Sleep process.
* @param ulExpectedIdleTime: Not used
* @retval None
*/
void PostSleepProcessing(uint32_t ulExpectedIdleTime)
{
/* Called by the kernel when the MCU exits a sleep mode because
configPOST_SLEEP_PROCESSING is #defined to PostSleepProcessing(). */
/* Avoid compiler warnings about the unused parameter. */
(void) ulExpectedIdleTime;
}
/**
* @brief Configure all GPIO's to AN to reduce the power consumption
* @param None
* @retval None
*/
static void GPIO_ConfigAN(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Configure all GPIO as analog to reduce current consumption on non used IOs */
/* Enable GPIOs clock */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOE_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOI_CLK_ENABLE();
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Pin = GPIO_PIN_All;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOI, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* Disable GPIOs clock */
__HAL_RCC_GPIOA_CLK_DISABLE();
__HAL_RCC_GPIOB_CLK_DISABLE();
__HAL_RCC_GPIOC_CLK_DISABLE();
__HAL_RCC_GPIOD_CLK_DISABLE();
__HAL_RCC_GPIOE_CLK_DISABLE();
__HAL_RCC_GPIOF_CLK_DISABLE();
__HAL_RCC_GPIOG_CLK_DISABLE();
__HAL_RCC_GPIOH_CLK_DISABLE();
__HAL_RCC_GPIOI_CLK_DISABLE();
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 168000000
* HCLK(Hz) = 168000000
* AHB Prescaler = 1
* APB1 Prescaler = 4
* APB2 Prescaler = 2
* HSE Frequency(Hz) = 25000000
* PLL_M = 25
* PLL_N = 336
* PLL_P = 2
* PLL_Q = 7
* VDD(V) = 3.3
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 5
* @param None
* @retval None
*/
static void SystemClock_Config(void)
{
RCC_ClkInitTypeDef RCC_ClkInitStruct;
RCC_OscInitTypeDef RCC_OscInitStruct;
/* Enable Power Control clock */
__HAL_RCC_PWR_CLK_ENABLE();
/* The voltage scaling allows optimizing the power consumption when the device is
clocked below the maximum system frequency, to update the voltage scaling value
regarding system frequency refer to product datasheet. */
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/* Enable HSE Oscillator and activate PLL with HSE as source */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 25;
RCC_OscInitStruct.PLL.PLLN = 336;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 7;
HAL_RCC_OscConfig(&RCC_OscInitStruct);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
clocks dividers */
RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
/* STM32F405x/407x/415x/417x Revision Z and upper devices: prefetch is supported */
if (HAL_GetREVID() >= 0x1001)
{
/* Enable the Flash prefetch */
__HAL_FLASH_PREFETCH_BUFFER_ENABLE();
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
Details ![]()
Show: from Types: Columns: ![]( "Show Project Names")
![]( "Show Locations")
![]( "Show Referring Symbols")
![]( "Show Scope")
This file uses the notable symbols shown below. Click anywhere in the file to view more details.