LL_TIM_InitTypeDef struct

Specifies the prescaler value used to divide the TIM clock. This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. This feature can be modified afterwards using unitary function LL_TIM_SetPrescaler().

Specifies the counter mode. This parameter can be a value of TIM_LL_EC_COUNTERMODE. This feature can be modified afterwards using unitary function LL_TIM_SetCounterMode().

Specifies the auto reload value to be loaded into the active Auto-Reload Register at the next update event. This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF. This feature can be modified afterwards using unitary function LL_TIM_SetAutoReload().

Specifies the clock division. This parameter can be a value of TIM_LL_EC_CLOCKDIVISION. This feature can be modified afterwards using unitary function LL_TIM_SetClockDivision().

Specifies the repetition counter value. Each time the RCR downcounter reaches zero, an update event is generated and counting restarts from the RCR value (N). This means in PWM mode that (N+1) corresponds to: - the number of PWM periods in edge-aligned mode - the number of half PWM period in center-aligned mode GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. This feature can be modified afterwards using unitary function LL_TIM_SetRepetitionCounter().