SourceVu will show references to HAL_QSPI_Receive_DMA() from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
HAL_QSPI_Receive_DMA() function
Receive an amount of data in non-blocking mode with DMA.
Syntax
Implemented in ![]()
stm32f4xx_hal_qspi.c:1436
Return value
HAL status
Notes
This function is used only in Indirect Read Mode If DMA peripheral access is configured as halfword, the number of data and the fifo threshold should be aligned on halfword If DMA peripheral access is configured as word, the number of data and the fifo threshold should be aligned on word
Related Functions
Found 36 other functions taking a ![]()
QSPI_HandleTypeDef
argument:
Function
Description
Set the command configuration.
Receive an amount of data in blocking mode.
Transmit an amount of data in blocking mode.
Configure the QSPI Automatic Polling Mode in blocking mode.
Handle QSPI interrupt request.
De-Initialize the QSPI peripheral.
Initialize the QSPI mode according to the specified parameters in the QSPI_InitTypeDef and initialize the associated handle.
Initialize the QSPI MSP.
DeInitialize the QSPI MSP.
Command completed callback.
Rx Transfer completed callback.
Tx Transfer completed callback.
Status Match callback.
Set the command configuration in interrupt mode.
Configure the QSPI Automatic Polling Mode in non-blocking mode.
Configure the Memory Mapped mode.
Wait for a flag state until timeout.
Send an amount of data in non-blocking mode with DMA.
Transfer Error callback.
Configure the communication registers.
Send an amount of data in non-blocking mode with interrupt.
Receive an amount of data in non-blocking mode with interrupt.
Abort the current transmission (non-blocking function)
Abort completed callback.
Abort the current transmission.
Wait for a flag state until timeout using CPU cycle.
FIFO Threshold callback.
Rx Half Transfer completed callback.
Tx Half Transfer completed callback.
Timeout callback.
Set QSPI timeout.
Return the QSPI handle state.
Return the QSPI error code.
Set QSPI Fifo threshold.
Get QSPI Fifo threshold.
Set FlashID.