SourceVu will show references to ETH_HandleTypeDef from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
ETH_HandleTypeDef struct
Syntax
typedef struct
#endif
{
ETH_TypeDef *Instance;
ETH_InitTypeDef Init;
ETH_TxDescListTypeDef TxDescList;
ETH_RxDescListTypeDef RxDescList;
#ifdef HAL_ETH_USE_PTP
ETH_TimeStampTypeDef TxTimestamp;
#endif
__IO HAL_ETH_StateTypeDef gState;
__IO uint32_t ErrorCode;
__IO uint32_t
DMAErrorCode;
__IO uint32_t
MACErrorCode;
__IO uint32_t MACWakeUpEvent;
__IO uint32_t MACLPIEvent;
__IO uint32_t IsPtpConfigured;
#if (USE_HAL_ETH_REGISTER_CALLBACKS == 1)
void (* TxCpltCallback)(struct __ETH_HandleTypeDef *heth);
void (* RxCpltCallback)(struct __ETH_HandleTypeDef *heth);
void (* ErrorCallback)(struct __ETH_HandleTypeDef *heth);
void (* PMTCallback)(struct __ETH_HandleTypeDef *heth);
void (* WakeUpCallback)(struct __ETH_HandleTypeDef *heth);
void (* MspInitCallback)(struct __ETH_HandleTypeDef *heth);
void (* MspDeInitCallback)(struct __ETH_HandleTypeDef *heth);
#endif
pETH_rxAllocateCallbackTypeDef rxAllocateCallback;
pETH_rxLinkCallbackTypeDef rxLinkCallback;
pETH_txFreeCallbackTypeDef txFreeCallback;
pETH_txPtpCallbackTypeDef txPtpCallback;
} ETH_HandleTypeDef;
Fields
Field
Declared as
Description
Tx descriptor wrapper: holds all Tx descriptors list addresses and current descriptor index.
Rx descriptor wrapper: holds all Rx descriptors list addresses and current descriptor index.
ETH state information related to global Handle management and also related to Tx operations. This parameter can be a value of ETH_State_Codes.
__IO uint32_t
Holds the global Error code of the ETH HAL status machine This parameter can be a value of ETH_Error_Code.
__IO uint32_t
Holds the DMA Rx Tx Error code when a DMA AIS interrupt occurs This parameter can be a combination of ETH_DMA_Status_Flags.
__IO uint32_t
Holds the MAC Rx Tx Error code when a MAC Rx or Tx status interrupt occurs This parameter can be a combination of ETH_MAC_Rx_Tx_Status.
__IO uint32_t
Holds the Wake Up event when the MAC exit the power down mode This parameter can be a value of ETH_MAC_Wake_Up_Event.
__IO uint32_t
Holds the LPI event when the an LPI status interrupt occurs. This parameter can be a value of ETHEx_LPI_Event.
__IO uint32_t
Holds the PTP configuration status. This parameter can be a value of ETH_PTP_Config_Status.
Related Functions
Found 72 other functions taking a ETH_HandleTypeDef
argument:
Function
Description
Read a PHY register
Writes to a PHY register.
Initializes the ETH MSP.
Initialize the Ethernet peripheral registers.
Set the MAC configuration.
Get the configuration of the MAC and MTL subsystems.
Enables Ethernet MAC and DMA reception and transmission
Stop Ethernet MAC and DMA reception/transmission
Read a received packet.
Configures the Clock range of ETH MDIO interface.
This function handles ETH interrupt request.
Rx Transfer completed callbacks.
Enables Ethernet MAC and DMA reception/transmission in Interrupt mode
Sends an Ethernet Packet in polling mode.
Tx Transfer completed callbacks.
Ethernet transfer error callbacks
DeInitializes ETH MSP.
Release transmitted Tx packets.
Sends an Ethernet Packet in interrupt mode.
Stop Ethernet MAC and DMA reception/transmission in Interrupt mode
Returns the ETH DMA error code
Initializes the DMA Tx descriptors in chain mode.
Initializes the DMA Rx descriptors in chain mode.
Sends an Ethernet frame.
Gets the Received frame in interrupt mode.
Set ETH MAC Configuration.
Configures Ethernet MAC and DMA with default parameters.
Clears the ETHERNET transmit FIFO.
This function gives back Rx Desc of the last received Packet to the DMA, so ETH DMA will be able to use these descriptors to receive next Packets.
Set the ETH MAC (L2) Filters configuration.
Returns the ETH state.
DeInitializes the ETH peripheral.
Prepare Tx DMA descriptor before transmission. called by HAL_ETH_Transmit_IT and HAL_ETH_Transmit_IT() API.
Clears the ETHERNET transmit FIFO.
Set the ETH DMA configuration.
Ethernet Power Management module IT callback
ETH WAKEUP interrupt callback
Configures Ethernet MAC and DMA with default parameters. called by HAL_ETH_Init() API.
Configures the selected MAC address.
Initializes the DMA Tx descriptors. called by HAL_ETH_Init() API.
Initializes the DMA Rx descriptors in chain mode. called by HAL_ETH_Init() API.
Enables the MAC transmission.
Disables the MAC transmission.
Enables the MAC reception.
Disables the MAC reception.
Enables the DMA transmission.
Disables the DMA transmission.
Enables the DMA reception.
Disables the DMA reception.
Configures the selected MAC address.
Returns the ETH MAC WakeUp event source
Register the Rx alloc callback.
Unregister the Rx alloc callback.
Set the Rx link data function.
Unregister the Rx link callback.
Get the error state of the last received packet.
Set the Tx free function.
Unregister the Tx free callback.
Set the VLAN Identifier for Rx packets
Get the ETH MAC (L2) Filters configuration.
Set the ETH Hash Table Value.
Set the source MAC Address to be matched.
Enters the Power down mode.
Exits from the Power down mode.
Set the WakeUp filter.
Returns the ETH error code
Returns the ETH MAC error code
Get the configuration of the DMA.
Checks for received frames.
Sets ETH DMA Configuration.