Symbols ![]()
loading...
Files ![]()
loading...
mwdt_ll_disable() function
Disable the MWDT
Syntax
Notes
This function does not disable the flashboot mode. Therefore, given that the MWDT is disabled using this function, a timeout can still occur if the flashboot mode is simultaneously enabled.
Related Functions
Found 35 other functions taking a ![]()
timg_dev_t
argument:
Function
Description
Enable alarm event
Enable timer, start counting
Enable timer interrupt by mask
Clear interrupt status by mask
Enable auto-reload mode
Enable Timer Group (GPTimer) module clock
Get interrupt status
Disable a particular stage of the MWDT
Feed the MWDT Resets the current timer count and current stage.
Get counter value
Set alarm value
Set reload value
Set clock prescale for timer
Set count direction
Disable write protection of the MWDT registers
Clear the MWDT interrupt status.
Enable write protection of the MWDT registers
Set clock source for timer
Trigger software capture event
Get interrupt status register address.
Set the interrupt enable bit for the MWDT interrupt.
Enable MWDT module clock
Get reload value
Trigger software reload, value set by `timer_ll_set_reload_value()` will be reflected into counter immediately
Set the clock source for the MWDT.
Enable or disable MWDT edge interrupt
Enable or disable MWDT level interrupt
Set the length of the CPU reset action
Set the length of the system reset action
Enable/Disable the MWDT flashboot mode.
Set the clock prescaler of the MWDT
Enable the MWDT
Check if the MWDT is enabled
Configure a particular stage of the MWDT
Enable the register clock forever
References
Code
Location
Referrer
Call Tree
mwdt_ll_disable() is called by 3 functions:
Data Use
mwdt_ll_disable() reads 1 variable and writes 1 variable: