ESP-IDF

mcpwm_ll_timer_disable_sync_out() is only used within ESP-IDF.

Symbol previews are coming soon...

Symbols

Files

Summary Syntax Arguments Related Examples References Call Tree Data Use Class Tree Override Tree Implementations Instances Lifecycle

SourceVuESP-IDF Framework and ExamplesESP-IDFmcpwm_ll_timer_disable_sync_out()

mcpwm_ll_timer_disable_sync_out() function

Disable sync output for MCPWM timer

Syntax

Show:

Summary

Declaration

from mcpwm_ll.h:446

static inline void mcpwm_ll_timer_disable_sync_out(mcpwm_dev_t *mcpwm, int timer_id);

Arguments

Argument

Description

mcpwm

Peripheral instance address

timer_id

Timer ID, index from 0 to 2

Related Functions

Found 103 other functions taking a mcpwm_dev_t argument:

Function

Description

mcpwm_ll_generator_set_action_on_timer_event()

Set generator action on timer event

mcpwm_ll_generator_set_action_on_compare_event()

Set generator action on compare event

mcpwm_ll_intr_enable()

Enable MCPWM interrupt for specific event mask

mcpwm_ll_deadtime_bypass_path()

Set which path to bypass in the deadtime submodule

mcpwm_ll_deadtime_invert_outpath()

Invert the output path

mcpwm_ll_intr_clear_status()

Clear MCPWM interrupt status by mask

mcpwm_ll_generator_set_action_on_brake_event()

Set generator action on brake event

mcpwm_ll_deadtime_red_select_generator()

Select the generator for RED block

mcpwm_ll_deadtime_fed_select_generator()

Select the generator for FED block

mcpwm_ll_deadtime_swap_out_path()

Swap the output path

mcpwm_ll_intr_get_status_reg()

Get interrupt status register address

mcpwm_ll_intr_get_status()

Get MCPWM interrupt status

mcpwm_ll_timer_enable_sync_input()

Enable sync input for timer

mcpwm_ll_operator_set_compare_value()

Set compare value for comparator

mcpwm_ll_timer_get_peak()

mcpwm_ll_timer_set_peak()

Set peak value for MCPWM timer

mcpwm_ll_timer_sync_out_on_timer_event()

Set the sync output signal to one of the timer event

mcpwm_ll_deadtime_enable_deb()

Enable the DEB block

mcpwm_ll_fault_enable_detection()

Enable GPIO fault detection

mcpwm_ll_capture_enable_channel()

Enable capture channel

mcpwm_ll_operator_get_compare_value()

mcpwm_ll_timer_set_clock_prescale()

Set MCPWM timer prescale

mcpwm_ll_timer_update_period_at_once()

Update MCPWM period immediately

mcpwm_ll_timer_set_count_mode()

Set MCPWM timer count mode

mcpwm_ll_timer_set_start_stop_command()

Execute MCPWM timer start/stop command

mcpwm_ll_timer_get_count_direction()

Get timer count direction

mcpwm_ll_operator_update_compare_at_once()

Update the compare value immediately

mcpwm_ll_operator_enable_update_compare_on_tez()

Enable to update the compare value upon TEZ event

mcpwm_ll_operator_enable_update_compare_on_tep()

Enable to update the compare value upon TEP event

mcpwm_ll_operator_set_deadtime_clock_src()

Set clock source for dead time submodule

mcpwm_ll_carrier_enable()

Enable carrier for MCPWM operator

mcpwm_ll_brake_clear_ost()

Clear the OST brake

mcpwm_ll_brake_enable_oneshot_mode()

Enable the OST brake

mcpwm_ll_brake_enable_cbc_mode()

Enable the CBC brake

mcpwm_ll_brake_enable_cbc_refresh_on_tez()

Enable refresh the CBC brake on TEZ event

mcpwm_ll_capture_enable_timer()

Enable capture timer

mcpwm_ll_capture_get_value()

Get the captured value

mcpwm_ll_capture_get_edge()

Get the captured edge

mcpwm_ll_timer_get_count_value()

Get timer count value

mcpwm_ll_timer_propagate_input_sync()

Use the input sync signal as the output sync signal (i.e. propagate the input sync signal)

mcpwm_ll_timer_trigger_soft_sync()

Trigger MCPWM timer software sync event

mcpwm_ll_timer_set_sync_phase_value()

Set sync count value for MCPWM timer

mcpwm_ll_timer_set_sync_phase_direction()

Set sync phase direction for MCPWM timer

mcpwm_ll_timer_set_gpio_sync_input()

Select which GPIO sync input to use

mcpwm_ll_timer_set_timer_sync_input()

Select which timer sync input to use

mcpwm_ll_timer_clear_sync_input()

Clear timer sync input selection

mcpwm_ll_invert_gpio_sync_input()

Invert the GPIO sync input signal

mcpwm_ll_operator_connect_timer()

Connect operator and timer by ID

mcpwm_ll_generator_set_action_on_trigger_event()

Set generator action on trigger event

mcpwm_ll_gen_disable_continue_force_action()

Disable continue forced action for generator

mcpwm_ll_gen_disable_noncontinue_force_action()

Disable non-continue forced action for generator

mcpwm_ll_deadtime_set_falling_delay()

Set falling edge delay duration

mcpwm_ll_deadtime_set_rising_delay()

Set rising edge delay duration

mcpwm_ll_deadtime_enable_update_delay_on_tez()

Enable to update deadtime on TEZ event

mcpwm_ll_carrier_set_prescale()

Set prescale for MCPWM carrier source clock

mcpwm_ll_carrier_set_duty()

Set duty cycle of MCPWM carrier

mcpwm_ll_carrier_out_invert()

Invert the signal after the carrier is applied

mcpwm_ll_carrier_in_invert()

Invert the signal before applying the carrier

mcpwm_ll_carrier_set_first_pulse_width()

Set the first pulse width of the carrier

mcpwm_ll_fault_set_active_level()

Set fault polarity (i.e. which level is treated as an active fault)

mcpwm_ll_fault_enable_cbc_refresh_on_tep()

Enable refresh the CBC brake on TEP event

mcpwm_ll_brake_enable_soft_cbc()

Enable software CBC brake

mcpwm_ll_brake_enable_soft_ost()

Enable software OST brake

mcpwm_ll_capture_enable_timer_sync()

Enable sync for capture timer

mcpwm_ll_capture_enable_posedge()

Enable capture on positive edge

mcpwm_ll_capture_enable_negedge()

Enable capture on negative edge

mcpwm_ll_capture_set_prescale()

Set the prescale of the input capture signal

mcpwm_ll_intr_clear_capture_status()

mcpwm_ll_group_enable_shadow_mode()

Enable update MCPWM active registers from shadow registers

mcpwm_ll_group_flush_shadow()

Flush shadow registers to active registers

mcpwm_ll_timer_enable_update_period_on_tez()

Enable to update MCPWM period upon TEZ event

mcpwm_ll_timer_enable_update_period_on_sync()

Enable to update MCPWM period upon sync event

mcpwm_ll_operator_enable_update_compare_on_sync()

Enable to update the compare value upon sync event

mcpwm_ll_operator_stop_update_compare()

Stop updating the compare value

mcpwm_ll_operator_update_action_at_once()

Update operator actions immediately

mcpwm_ll_operator_enable_update_action_on_tez()

Enable update actions on TEZ event

mcpwm_ll_operator_enable_update_action_on_tep()

Enable update actions on TEP event

mcpwm_ll_operator_enable_update_action_on_sync()

Enable update actions on sync event

mcpwm_ll_operator_stop_update_action()

Stop updating actions

mcpwm_ll_operator_set_trigger_from_gpio_fault()

Set trigger from GPIO (reuse the fault GPIO)

mcpwm_ll_operator_set_trigger_from_sync()

Set trigger from sync event (when the timer/gpio/soft taken the sync signal)

mcpwm_ll_generator_reset_actions()

Reset actions for the generator

mcpwm_ll_gen_trigger_noncontinue_force_action()

Trigger non-continue forced action for generator

mcpwm_ll_gen_set_continue_force_level()

Set continue force level for generator

mcpwm_ll_gen_set_noncontinue_force_level()

Set non-continue force level for generator

mcpwm_ll_deadtime_get_switch_topology()

Get the deadtime switch topology

mcpwm_ll_deadtime_update_delay_at_once()

Update deadtime immediately

mcpwm_ll_deadtime_enable_update_delay_on_tep()

Enable to update deadtime on TEP event

mcpwm_ll_deadtime_enable_update_delay_on_sync()

Enable to update deadtime on sync event

mcpwm_ll_deadtime_stop_update_delay()

Stop updating deadtime

mcpwm_ll_brake_trigger_soft_cbc()

Trigger software CBC brake for once

mcpwm_ll_brake_trigger_soft_ost()

Trigger software OST brake for once

mcpwm_ll_ost_brake_active()

Whether the OST brake is still active

mcpwm_ll_cbc_brake_active()

Whether the CBC brake is still active

mcpwm_ll_capture_set_sync_phase_value()

Set sync phase for capture timer

mcpwm_ll_capture_set_timer_sync()

Set the timer sync source for MCPWM capture timer

mcpwm_ll_capture_set_gpio_sync()

Set the GPIO sync source for MCPWM capture timer

mcpwm_ll_capture_trigger_sw_sync()

Trigger a software sync for capture timer

mcpwm_ll_invert_input()

Invert the capture input signal

mcpwm_ll_trigger_soft_capture()

Trigger the software capture for once

mcpwm_ll_timer_get_count_mode()

mcpwm_ll_intr_get_capture_status()

mcpwm_ll_operator_flush_shadow()

Flush operator shadow registers to active registers

Examples

References

from examples

Code

Location

Referrer

static inline void mcpwm_ll_timer_disable_sync_out(mcpwm_dev_t *mcpwm, int timer_id)

mcpwm_ll.h:446

mcpwm_ll_timer_disable_sync_out(hal->dev, timer_id);

mcpwm_hal.c:29

mcpwm_hal_timer_reset()

mcpwm_ll_timer_disable_sync_out(hal->dev, timer_num);

mcpwm_legacy.c:1048

mcpwm_set_timer_sync_output()

mcpwm_ll_timer_disable_sync_out(group->hal.dev, timer_id);

mcpwm_sync.c:121

mcpwm_del_timer_sync_src()

Call Tree

from examples

mcpwm_ll_timer_disable_sync_out() is called by 3 functions:

mcpwm_set_timer_sync_output()

mcpwm_del_timer_sync_src()

mcpwm_hal_timer_reset()

All items filtered out

mcpwm_ll_timer_disable_sync_out()

All items filtered out

Data Use

from examples

mcpwm_ll_timer_disable_sync_out() reads 2 variables and writes 1 variable:

mcpwm_timer_regs_t::timer_sync

mcpwm_dev_t::timer

All items filtered out

mcpwm_ll_timer_disable_sync_out()

mcpwm_timer_sync_reg_t::::timer_synco_sel

All items filtered out

Class Tree

from examples

All items filtered out

Override Tree

from examples

All items filtered out

Implementations

from examples

All items filtered out

Instances

from examples

Lifecycle

from examples

All items filtered out