Outline ![]()
Files ![]()
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
/**
******************************************************************************
* @file Examples_LL/USART/USART_Communication_Rx_IT_Init/Src/main.c
* @author MCD Application Team
* @brief This example describes how to send bytes over USART IP using
* the STM32F4xx USART LL API.
* Peripheral initialization done using LL initialization function.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/** @addtogroup STM32F4xx_LL_Examples
* @{
*/
/** @addtogroup USART_Communication_Rx_IT_Init
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
void Configure_USART(void);
void LED_Init(void);
void LED_On(void);
void LED_Off(void);
void LED_Blinking(uint32_t Period);
void UserButton_Init(void);
/* Private functions ---------------------------------------------------------*/
/**
* @brief Main program
* @param None
* @retval None
*/
int main(void)
{
/* Configure the system clock to 100 MHz */
SystemClock_Config();
/* Initialize LED2 */
LED_Init();
/* Set LED2 Off */
LED_Off();
/* Initialize button in EXTI mode */
UserButton_Init();
/* Configure USARTx (USART IP configuration and related GPIO initialization) */
Configure_USART();
/* Infinite loop */
while (1)
{
}
}
/**
* @brief This function configures USARTx Instance.
* @note This function is used to :
* -1- Enable GPIO clock and configures the USART pins.
* -2- NVIC Configuration for USART interrupts.
* -3- Enable the USART peripheral clock and clock source.
* -4- Configure USART functional parameters.
* -5- Enable USART.
* @param None
* @retval None
*/
void Configure_USART(void)
{
LL_USART_InitTypeDef usart_initstruct;
/* (1) Enable GPIO clock and configures the USART pins *********************/
/* Enable the peripheral clock of GPIO Port */
USARTx_GPIO_CLK_ENABLE();
/* Configure Tx Pin as : Alternate function, High Speed, Push pull, Pull up */
LL_GPIO_SetPinMode(USARTx_TX_GPIO_PORT, USARTx_TX_PIN, LL_GPIO_MODE_ALTERNATE);
USARTx_SET_TX_GPIO_AF();
LL_GPIO_SetPinSpeed(USARTx_TX_GPIO_PORT, USARTx_TX_PIN, LL_GPIO_SPEED_FREQ_HIGH);
LL_GPIO_SetPinOutputType(USARTx_TX_GPIO_PORT, USARTx_TX_PIN, LL_GPIO_OUTPUT_PUSHPULL);
LL_GPIO_SetPinPull(USARTx_TX_GPIO_PORT, USARTx_TX_PIN, LL_GPIO_PULL_UP);
/* Configure Rx Pin as : Alternate function, High Speed, Push pull, Pull up */
LL_GPIO_SetPinMode(USARTx_RX_GPIO_PORT, USARTx_RX_PIN, LL_GPIO_MODE_ALTERNATE);
USARTx_SET_RX_GPIO_AF();
LL_GPIO_SetPinSpeed(USARTx_RX_GPIO_PORT, USARTx_RX_PIN, LL_GPIO_SPEED_FREQ_HIGH);
LL_GPIO_SetPinOutputType(USARTx_RX_GPIO_PORT, USARTx_RX_PIN, LL_GPIO_OUTPUT_PUSHPULL);
LL_GPIO_SetPinPull(USARTx_RX_GPIO_PORT, USARTx_RX_PIN, LL_GPIO_PULL_UP);
/* (2) NVIC Configuration for USART interrupts */
/* - Set priority for USARTx_IRQn */
/* - Enable USARTx_IRQn */
NVIC_SetPriority(USARTx_IRQn, 0);
NVIC_EnableIRQ(USARTx_IRQn);
/* (3) Enable USART peripheral clock and clock source ***********************/
USARTx_CLK_ENABLE();
/* (4) Configure USART functional parameters ********************************/
/* Disable USART prior modifying configuration registers */
/* Note: Commented as corresponding to Reset value */
// LL_USART_Disable(USARTx_INSTANCE);
/* Set fields of initialization structure */
/* - BaudRate : 115200 */
/* - DataWidth : LL_USART_DATAWIDTH_8B */
/* - StopBits : LL_USART_STOPBITS_1 */
/* - Parity : LL_USART_PARITY_NONE */
/* - TransferDirection : LL_USART_DIRECTION_TX_RX */
/* - HardwareFlowControl : LL_USART_HWCONTROL_NONE */
/* - OverSampling : LL_USART_OVERSAMPLING_16 */
usart_initstruct.BaudRate = 115200;
usart_initstruct.DataWidth = LL_USART_DATAWIDTH_8B;
usart_initstruct.StopBits = LL_USART_STOPBITS_1;
usart_initstruct.Parity = LL_USART_PARITY_NONE;
usart_initstruct.TransferDirection = LL_USART_DIRECTION_TX_RX;
usart_initstruct.HardwareFlowControl = LL_USART_HWCONTROL_NONE;
usart_initstruct.OverSampling = LL_USART_OVERSAMPLING_16;
/* Initialize USART instance according to parameters defined in initialization structure */
LL_USART_Init(USARTx_INSTANCE, &usart_initstruct);
/* (5) Enable USART *********************************************************/
LL_USART_Enable(USARTx_INSTANCE);
/* Enable RXNE and Error interrupts */
LL_USART_EnableIT_RXNE(USARTx_INSTANCE);
LL_USART_EnableIT_ERROR(USARTx_INSTANCE);
}
/**
* @brief Initialize LED2.
* @param None
* @retval None
*/
void LED_Init(void)
{
/* Enable the LED2 Clock */
LED2_GPIO_CLK_ENABLE();
/* Configure IO in output push-pull mode to drive external LED2 */
LL_GPIO_SetPinMode(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_MODE_OUTPUT);
/* Reset value is LL_GPIO_OUTPUT_PUSHPULL */
//LL_GPIO_SetPinOutputType(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_OUTPUT_PUSHPULL);
/* Reset value is LL_GPIO_SPEED_FREQ_LOW */
//LL_GPIO_SetPinSpeed(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_SPEED_FREQ_LOW);
/* Reset value is LL_GPIO_PULL_NO */
//LL_GPIO_SetPinPull(LED2_GPIO_PORT, LED2_PIN, LL_GPIO_PULL_NO);
}
/**
* @brief Turn-on LED2.
* @param None
* @retval None
*/
void LED_On(void)
{
/* Turn LED2 on */
LL_GPIO_SetOutputPin(LED2_GPIO_PORT, LED2_PIN);
}
/**
* @brief Turn-off LED2.
* @param None
* @retval None
*/
void LED_Off(void)
{
/* Turn LED2 off */
LL_GPIO_ResetOutputPin(LED2_GPIO_PORT, LED2_PIN);
}
/**
* @brief Set LED2 to Blinking mode for an infinite loop (toggle period based on value provided as input parameter).
* @param Period : Period of time (in ms) between each toggling of LED
* This parameter can be user defined values. Pre-defined values used in that example are :
* @arg LED_BLINK_FAST : Fast Blinking
* @arg LED_BLINK_SLOW : Slow Blinking
* @arg LED_BLINK_ERROR : Error specific Blinking
* @retval None
*/
void LED_Blinking(uint32_t Period)
{
/* Toggle LED2 in an infinite loop */
while (1)
{
LL_GPIO_TogglePin(LED2_GPIO_PORT, LED2_PIN);
LL_mDelay(Period);
}
}
/**
* @brief Configures User push-button in GPIO or EXTI Line Mode.
* @param None
* @retval None
*/
void UserButton_Init(void)
{
/* Enable the BUTTON Clock */
USER_BUTTON_GPIO_CLK_ENABLE();
/* Configure GPIO for BUTTON */
LL_GPIO_SetPinMode(USER_BUTTON_GPIO_PORT, USER_BUTTON_PIN, LL_GPIO_MODE_INPUT);
LL_GPIO_SetPinPull(USER_BUTTON_GPIO_PORT, USER_BUTTON_PIN, LL_GPIO_PULL_NO);
/* Connect External Line to the GPIO*/
USER_BUTTON_SYSCFG_SET_EXTI();
/* Enable a rising trigger EXTI13 Interrupt */
USER_BUTTON_EXTI_LINE_ENABLE();
USER_BUTTON_EXTI_FALLING_TRIG_ENABLE();
/* Configure NVIC for USER_BUTTON_EXTI_IRQn */
NVIC_SetPriority(USER_BUTTON_EXTI_IRQn, 3);
NVIC_EnableIRQ(USER_BUTTON_EXTI_IRQn);
}
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 100000000
* HCLK(Hz) = 100000000
* AHB Prescaler = 1
* APB1 Prescaler = 2
* APB2 Prescaler = 1
* HSE Frequency(Hz) = 8000000
* PLL_M = 8
* PLL_N = 400
* PLL_P = 4
* VDD(V) = 3.3
* Main regulator output voltage = Scale1 mode
* Flash Latency(WS) = 3
* @param None
* @retval None
*/
void SystemClock_Config(void)
{
/* Enable HSE oscillator */
LL_RCC_HSE_EnableBypass();
LL_RCC_HSE_Enable();
while(LL_RCC_HSE_IsReady() != 1)
{
};
/* Set FLASH latency */
LL_FLASH_SetLatency(LL_FLASH_LATENCY_3);
/* Main PLL configuration and activation */
LL_RCC_PLL_ConfigDomain_SYS(LL_RCC_PLLSOURCE_HSE, LL_RCC_PLLM_DIV_8, 400, LL_RCC_PLLP_DIV_4);
LL_RCC_PLL_Enable();
while(LL_RCC_PLL_IsReady() != 1)
{
};
/* Sysclk activation on the main PLL */
LL_RCC_SetAHBPrescaler(LL_RCC_SYSCLK_DIV_1);
LL_RCC_SetSysClkSource(LL_RCC_SYS_CLKSOURCE_PLL);
while(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)
{
};
/* Set APB1 & APB2 prescaler */
LL_RCC_SetAPB1Prescaler(LL_RCC_APB1_DIV_2);
LL_RCC_SetAPB2Prescaler(LL_RCC_APB2_DIV_1);
/* Set systick to 1ms */
SysTick_Config(100000000 / 1000);
/* Update CMSIS variable (which can be updated also through SystemCoreClockUpdate function) */
SystemCoreClock = 100000000;
}
/******************************************************************************/
/* IRQ HANDLER TREATMENT Functions */
/******************************************************************************/
/**
* @brief Function to manage Button push
* @param None
* @retval None
*/
void UserButton_Callback(void)
{
/* Turn LED2 Off on User button press (allow to restart sequence) */
LED_Off();
}
/**
* @brief Function called from USART IRQ Handler when RXNE flag is set
* Function is in charge of reading character received on USART RX line.
* @param None
* @retval None
*/
void USART_CharReception_Callback(void)
{
__IO uint32_t received_char;
/* Read Received character. RXNE flag is cleared by reading of DR register */
received_char = LL_USART_ReceiveData8(USARTx_INSTANCE);
/* Check if received value is corresponding to specific one : S or s */
if ((received_char == 'S') || (received_char == 's'))
{
/* Turn LED2 On : Expected character has been received */
LED_On();
}
/* Echo received character on TX */
LL_USART_TransmitData8(USARTx_INSTANCE, received_char);
}
/**
* @brief Function called in case of error detected in USART IT Handler
* @param None
* @retval None
*/
void Error_Callback(void)
{
__IO uint32_t sr_reg;
/* Disable USARTx_IRQn */
NVIC_DisableIRQ(USARTx_IRQn);
/* Error handling example :
- Read USART SR register to identify flag that leads to IT raising
- Perform corresponding error handling treatment according to flag
*/
sr_reg = LL_USART_ReadReg(USARTx_INSTANCE, SR);
if (sr_reg & LL_USART_SR_NE)
{
/* case Noise Error flag is raised : ... */
LED_Blinking(LED_BLINK_FAST);
}
else
{
/* Unexpected IT source : Set LED to Blinking mode to indicate error occurs */
LED_Blinking(LED_BLINK_ERROR);
}
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d", file, line) */
/* Infinite loop */
while (1)
{
}
}
#endif
/**
* @}
*/
/**
* @}
*/
Details ![]()
Show: from Types: Columns: ![]( "Show Project Names")
![]( "Show Locations")
![]( "Show Referring Symbols")
![]( "Show Scope")
This file uses the notable symbols shown below. Click anywhere in the file to view more details.