SourceVu will show references to TIM_OnePulse_InitTypeDef from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
TIM_OnePulse_InitTypeDef struct
TIM One Pulse Mode Configuration Structure definition
Syntax
typedef struct
{
uint32_t OCMode;
uint32_t Pulse;
uint32_t OCPolarity;
uint32_t OCNPolarity;
uint32_t OCIdleState;
uint32_t OCNIdleState;
uint32_t ICPolarity;
uint32_t ICSelection;
uint32_t ICFilter;
} TIM_OnePulse_InitTypeDef;
Fields
Field
Declared as
Description
uint32_t
Specifies the TIM mode. This parameter can be a value of TIM_Output_Compare_and_PWM_modes.
uint32_t
Specifies the pulse value to be loaded into the Capture Compare Register. This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF.
uint32_t
Specifies the output polarity. This parameter can be a value of TIM_Output_Compare_Polarity.
uint32_t
Specifies the complementary output polarity. This parameter can be a value of TIM_Output_Compare_N_Polarity.
uint32_t
Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM_Output_Compare_Idle_State.
uint32_t
Specifies the TIM Output Compare pin state during Idle state. This parameter can be a value of TIM_Output_Compare_N_Idle_State.
uint32_t
Specifies the active edge of the input signal. This parameter can be a value of TIM_Input_Capture_Polarity.
uint32_t
Specifies the input. This parameter can be a value of TIM_Input_Capture_Selection.
uint32_t
Specifies the input capture filter. This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF.