SourceVu will show references to PCD_HandleTypeDef from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
PCD_HandleTypeDef struct
Syntax
typedef struct
#endif
{
PCD_TypeDef *Instance;
PCD_InitTypeDef Init;
__IO uint8_t USB_Address;
PCD_EPTypeDef IN_ep[16];
PCD_EPTypeDef OUT_ep[16];
HAL_LockTypeDef Lock;
__IO PCD_StateTypeDef State;
__IO uint32_t ErrorCode;
uint32_t Setup[12];
PCD_LPM_StateTypeDef LPM_State;
uint32_t BESL;
uint32_t FrameNumber;
uint32_t lpm_active;
uint32_t battery_charging_active;
void *pData;
#if (USE_HAL_PCD_REGISTER_CALLBACKS == 1U)
void (* SOFCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* SetupStageCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* ResetCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* SuspendCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* ResumeCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* ConnectCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* DisconnectCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* DataOutStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);
void (* DataInStageCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);
void (* ISOOUTIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);
void (* ISOINIncompleteCallback)(struct __PCD_HandleTypeDef *hpcd, uint8_t epnum);
void (* BCDCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_BCD_MsgTypeDef msg);
void (* LPMCallback)(struct __PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg);
void (* MspInitCallback)(struct __PCD_HandleTypeDef *hpcd);
void (* MspDeInitCallback)(struct __PCD_HandleTypeDef *hpcd);
#endif
} PCD_HandleTypeDef;
Fields
Field
Declared as
Description
uint32_t
uint32_t
Enable or disable the Link Power Management . This parameter can be set to ENABLE or DISABLE.
uint32_t
Enable or disable Battery charging. This parameter can be set to ENABLE or DISABLE.
Related Functions
Found 47 other functions taking a PCD_HandleTypeDef
argument:
Function
Description
Set Tx FIFO
Handles PCD interrupt request.
Set Rx FIFO
Initializes the PCD according to the specified parameters in the PCD_InitTypeDef and initialize the associated handle.
Initializes the PCD MSP.
DeInitializes PCD MSP.
Start the USB device
Send an amount of data
Data OUT stage callback.
Receive an amount of data.
Flush an endpoint
Open and configure an endpoint.
Stop the USB device.
Setup stage callback
USB Reset callback.
Suspend event callback.
Disconnection event callback.
Data IN stage callback
Get Received Data Size
USB Start Of Frame callback.
Resume event callback.
Connection event callback.
Incomplete ISO OUT callback.
Incomplete ISO IN callback.
Set the USB Device address.
Deactivate an endpoint.
Set a STALL condition over an endpoint
Clear a STALL condition over in an endpoint
DeInitializes the PCD peripheral.
Activate remote wakeup signalling
De-activate remote wakeup signalling.
Send BatteryCharging message to user layer callback.
Send LPM message to user layer callback.
Abort an USB EP transaction.
Activate BatteryCharging feature.
Handle BatteryCharging Process.
Activate LPM feature.
Disconnect the USB device.
Check FIFO for the next packet to be loaded.
process EP OUT transfer complete interrupt.
process EP OUT setup packet received interrupt.
Deactivate BatteryCharging feature.
Deactivate LPM feature.
Handles PCD Wakeup interrupt request.
Connect the USB device
Set the USB Device high speed test mode.
Return the PCD handle state.