HAL_RTCEx_SetTimeStamp_IT() function

pointer to a RTC_HandleTypeDef structure that contains the configuration information for RTC.

Specifies the pin edge on which the Timestamp is activated. This parameter can be one of the following values: @arg RTC_TIMESTAMPEDGE_RISING: the Timestamp event occurs on the rising edge of the related pin. @arg RTC_TIMESTAMPEDGE_FALLING: the Timestamp event occurs on the falling edge of the related pin.

Specifies the RTC Timestamp Pin. This parameter can be one of the following values: @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC Timestamp Pin. @arg RTC_TIMESTAMPPIN_POS1: PI8 is selected as RTC Timestamp Pin.

Initializes the RTC peripheral

Deactivates wakeup timer counter.

Initializes the RTC MSP.

DeInitializes the RTC MSP.

Sets wakeup timer with interrupt.

Reads data from the specified RTC Backup data Register.

Sets RTC current time.

Gets RTC current time.

Gets RTC current date.

Handles Wakeup Timer interrupt request.

Wakeup Timer callback.

Writes a data in a specified RTC Backup data register.

Sets RTC current date.

Alarm A callback.

Handles Alarm interrupt request.

Handles Timestamp and Tamper interrupt request.

Deactivates Tamper.

Tamper 1 callback.

Sets the specified RTC Alarm with Interrupt.

Sets Tamper with interrupt.

Enters the RTC Initialization mode.

Exits the RTC Initialization mode.

Timestamp callback.

Gets the RTC Timestamp value.

Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are synchronized with RTC APB clock.

Deactivates the specified RTC Alarm.

Sets Tamper.

Enables the RTC reference clock detection.

Alarm B callback.

DeInitializes the RTC peripheral

Tamper 2 callback.

Sets the Smooth calibration parameters.

Configures the Synchronization Shift Control Settings.

Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).

Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).

Disable the RTC reference clock detection.

Enables the Bypass Shadow feature.

Disables the Bypass Shadow feature.

Handles Alarm B Polling request.

Sets Timestamp.

Deactivates Timestamp.

Sets the specified RTC Alarm.

Gets the RTC Alarm value and masks.

Handles Alarm A Polling request.

Daylight Saving Time, adds one hour to the calendar in one single operation without going through the initialization procedure.

Daylight Saving Time, subtracts one hour from the calendar in one single operation without going through the initialization procedure.

Daylight Saving Time, sets the store operation bit.

Daylight Saving Time, clears the store operation bit.

Daylight Saving Time, reads the store operation bit.

Returns the RTC state.

Handles Timestamp polling request.

Handles Tamper 1 Polling.

Handles Tamper 2 Polling.

Sets wakeup timer.

Gets wakeup timer counter.

Handles Wakeup Timer Polling.

Sets the Coarse calibration parameters.

Deactivates the Coarse calibration parameters.