Symbols ![]()
loading...
Files ![]()
loading...
HAL_IRDA_Receive() function
Receive an amount of data in blocking mode.
Syntax
HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda,
uint8_t *pData,
uint16_t Size,
uint32_t Timeout);
Implemented in ![]()
stm32f4xx_hal_irda.c:849
Return value
HAL status
Notes
When UART parity is not enabled (PCE = 0), and Word Length is configured to 9 bits (M1-M0 = 01), the received data is handled as a set of u16. In this case, Size must reflect the number of u16 available through pData.
Related Functions
Found 36 other functions taking a ![]()
IRDA_HandleTypeDef
argument:
Function
Description
IRDA error callback.
This function handles IRDA Communication Timeout. It waits until a flag is no longer in the specified status.
IRDA Abort Complete callback.
IRDA Abort Transmit Complete callback.
IRDA Abort Receive Complete callback.
End ongoing Rx transfer on IRDA peripheral (following error detection or Reception completion).
Tx Transfer complete callback.
Rx Transfer complete callback.
End ongoing Tx transfer on IRDA peripheral (following error detection or Transmit completion).
Receives an amount of data in non blocking mode.
IRDA MSP Init.
IRDA MSP DeInit.
Tx Half Transfer completed callback.
Rx Half Transfer complete callback.
Send an amount of data in non blocking mode.
Wraps up transmission in non blocking mode.
Configures the IRDA peripheral.
Initializes the IRDA mode according to the specified parameters in the IRDA_InitTypeDef and create the associated handle.
DeInitializes the IRDA peripheral
Sends an amount of data in blocking mode.
Send an amount of data in non blocking mode.
Receive an amount of data in non blocking mode.
Send an amount of data in DMA mode.
Receives an amount of data in DMA mode.
Pauses the DMA Transfer.
Resumes the DMA Transfer.
Stops the DMA Transfer.
Abort ongoing transfers (blocking mode).
Abort ongoing Transmit transfer (blocking mode).
Abort ongoing Receive transfer (blocking mode).
Abort ongoing transfers (Interrupt mode).
Abort ongoing Transmit transfer (Interrupt mode).
Abort ongoing Receive transfer (Interrupt mode).
This function handles IRDA interrupt request.
Return the IRDA state.
Return the IRDA error code