HAL_DAC_GetValue() function

pointer to a DAC_HandleTypeDef structure that contains the configuration information for the specified DAC.

The selected DAC channel. This parameter can be one of the following values: @arg DAC_CHANNEL_1: DAC Channel1 selected @arg DAC_CHANNEL_2: DAC Channel2 selected

Configures the selected DAC channel.

Initialize the DAC peripheral according to the specified parameters in the DAC_InitStruct and initialize the associated handle.

Set the specified data holding register value for DAC channel.

Initialize the DAC MSP.

DeInitialize the DAC MSP.

Enables DAC and starts conversion of channel.

Deinitialize the DAC peripheral registers to their default reset values.

Enables DAC and starts conversion of channel.

Enable or disable the selected DAC channel wave generation.

Error DAC callback for Channel1.

Handles DAC interrupt request This function uses the interruption of DMA underrun.

Conversion complete callback in non-blocking mode for Channel1

Conversion half DMA transfer callback in non-blocking mode for Channel1

DMA underrun DAC callback for channel1.

Conversion complete callback in non-blocking mode for Channel2.

Conversion half DMA transfer callback in non-blocking mode for Channel2.

Error DAC callback for Channel2.

DMA underrun DAC callback for Channel2.

Disables DAC and stop conversion of channel.

Disables DAC and stop conversion of channel.

return the DAC handle state

Return the DAC error code

Enable or disable the selected DAC channel wave generation.

Enables DAC and starts conversion of both channels.

Disables DAC and stop conversion of both channels.

Set the specified data holding register value for dual DAC channel.

Return the last data output value of the selected DAC channel.