Symbols ![]()
loading...
Files ![]()
loading...
HAL_ADC_AnalogWDGConfig() function
Configures the analog watchdog.
Syntax
HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef *hadc,
ADC_AnalogWDGConfTypeDef *AnalogWDGConfig);
Implemented in ![]()
stm32f4xx_hal_adc.c:1792
Return value
HAL status
Notes
Analog watchdog thresholds can be modified while ADC conversion is on going. In this case, some constraints must be taken into account: The programmed threshold values are effective from the next ADC EOC (end of unitary conversion). Considering that registers write delay may happen due to bus activity, this might cause an uncertainty on the effective timing of the new programmed threshold values.
Related Functions
Found 34 other functions taking a ![]()
ADC_HandleTypeDef
argument:
Function
Description
Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct and initializes the ADC MSP.
Configures for the selected ADC regular channel its corresponding rank in the sequencer and its sample time.
Initializes the ADC MSP.
DeInitializes the ADC MSP.
Regular conversion complete callback in non blocking mode
Gets the converted value from data register of regular channel.
Enables ADC and starts conversion of the regular channels.
Enables the interrupt and starts ADC conversion of regular channels.
Handles ADC interrupt request
Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral
Poll for regular conversion complete
Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
Configures the ADC multi-mode
return the ADC state
Deinitializes the ADCx peripheral registers to their default reset values.
Injected conversion complete callback in non blocking mode
Enables the interrupt and starts ADC conversion of injected channels.
Gets the converted value from data register of injected channel.
Configures for the selected ADC injected channel its corresponding rank in the sequencer and its sample time.
Error ADC callback.
Regular conversion half DMA transfer callback in non blocking mode
Analog watchdog callback in non blocking mode
Initializes the ADCx peripheral according to the specified parameters in the ADC_InitStruct without initializing the ADC MSP.
Enables the selected ADC software start conversion of the injected channels.
Stop conversion of injected channels. Disable ADC peripheral if no regular conversion is on going.
Poll for injected conversion complete
Stop conversion of injected channels, disable interruption of end-of-conversion. Disable ADC peripheral if no regular conversion is on going.
Disables ADC DMA (multi-ADC mode) and disables ADC peripheral
Returns the last ADC1, ADC2 and ADC3 regular conversions results data in the selected multi mode.
Disables ADC and stop conversion of regular channels.
Poll for conversion event
Disables the interrupt and stop ADC conversion of regular channels.
Disables ADC DMA (Single-ADC mode) and disables ADC peripheral
Return the ADC error code