FSMC_NORSRAM_TimingTypeDef struct

Defines the number of HCLK cycles to configure the duration of the address setup time. This parameter can be a value between Min_Data = 0 and Max_Data = 15.

Defines the number of HCLK cycles to configure the duration of the address hold time. This parameter can be a value between Min_Data = 1 and Max_Data = 15.

Defines the number of HCLK cycles to configure the duration of the data setup time. This parameter can be a value between Min_Data = 1 and Max_Data = 255.

Defines the number of HCLK cycles to configure the duration of the bus turnaround. This parameter can be a value between Min_Data = 0 and Max_Data = 15.

Defines the period of CLK clock output signal, expressed in number of HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.

Defines the number of memory clock cycles to issue to the memory before getting the first data. The parameter value depends on the memory type as shown below: - It must be set to 0 in case of a CRAM - It is don't care in asynchronous NOR, SRAM or ROM accesses - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories with synchronous burst mode enable.

Specifies the asynchronous access mode. This parameter can be a value of FSMC_Access_Mode.