gpio_ll_deep_sleep_hold_en() function

Peripheral GPIO hardware instance address.

Enable output mode on GPIO.

GPIO set output level

Select a function for the pin in the IOMUX

Enable input mode on GPIO.

Disable pull-up on GPIO.

Disable pull-down on GPIO.

Clear GPIO interrupt status

Clear GPIO interrupt status high

Disable output mode on GPIO.

Enable pull-up on GPIO.

Enable GPIO pin used for wakeup from sleep.

Enable pull-down on GPIO.

Enable open-drain mode on GPIO.

GPIO get input level @warning If the pad is not configured for input (or input and output) the returned value is always 0.

Disable GPIO pin used for wakeup from sleep.

Return slp-sel status on GPIO.

Disable GPIO pull-up in sleep mode.

Disable GPIO pull-down in sleep mode.

GPIO set interrupt trigger type

Disable input mode on GPIO.

Disable GPIO input in sleep mode.

Disable GPIO output in sleep mode.

Disable open-drain mode on GPIO.

Disconnect any peripheral output signal routed via GPIO matrix to the pin

Set pad input to a peripheral signal through the IOMUX.

Get the configuration for an IO

Return pull-up status on GPIO.

Return pull-down status on GPIO.

Enable GPIO pull-up in sleep mode.

Return slp-pull-up status on GPIO.

Enable GPIO pull-down in sleep mode.

Return slp-pull-down status on GPIO.

Get GPIO interrupt status

Get GPIO interrupt status high

Enable GPIO module interrupt signal

Disable GPIO module interrupt signal

Enable GPIO input in sleep mode.

Enable GPIO output in sleep mode.

Enable GPIO wake-up function.

Disable GPIO wake-up function.

Set GPIO pad drive capability

Get GPIO pad drive capability

Get deep sleep hold status

Disable all digital gpio pad hold function during Deep-sleep.

Enable gpio pad hold function.

Disable gpio pad hold function.

Get digital gpio pad hold status.

Set peripheral output to an GPIO pad through the IOMUX.

Get the GPIO number that is routed to the input peripheral signal through GPIO matrix.