SourceVu will show references to eth_phy_config_t from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
eth_phy_config_t struct
Ethernet PHY configuration
Syntax
typedef struct
{
int32_t phy_addr;
uint32_t reset_timeout_ms;
uint32_t autonego_timeout_ms;
int reset_gpio_num;
int32_t hw_reset_assert_time_us;
int32_t post_hw_reset_delay_ms;
} eth_phy_config_t;
Fields
Field
Declared as
Description
int32_t
PHY address, set -1 to enable PHY address detection at initialization stage.
int32_t
Time the reset pin is asserted (Unit: us), 0 to use chip specific default.
int32_t
Time to wait after the HW reset (Unit: ms), 0 to use chip specific default, -1 means no wait.
Related Functions
Found 7 other functions taking a eth_phy_config_t
argument:
Function
Description
Initializes configuration of parent IEEE 802.3 PHY object infostructure
Create a PHY instance of IP101
Create a PHY instance of generic chip which conforms with IEEE 802.3 @warning While basic functionality should always work, some specific features might be limited, even if the PHY meets IEEE 802.3 standard. A typical example is loopback functionality, where certain PHYs may require setting a specific speed mode to operate correctly.
Create a PHY instance of RTL8201
Create a PHY instance of LAN87xx
Create a PHY instance of DP83848
Create a PHY instance of KSZ80xx The phy model from the KSZ80xx series is detected automatically. If the driver is unable to detect a supported model, \c NULL is returned. Currently, the following models are supported: KSZ8001, KSZ8021, KSZ8031, KSZ8041, KSZ8051, KSZ8061, KSZ8081, KSZ8091