Symbols ![]()
loading...
Files ![]()
loading...
esp_eth_phy_802_3_set_mmd_addr() function
Write to DIO device's internal address register
Syntax
esp_err_t esp_eth_phy_802_3_set_mmd_addr(phy_802_3_t *phy_802_3,
uint8_t devaddr,
uint16_t mmd_addr);
Implemented in ![]()
esp_eth_phy_802_3.c:588
Return value
- ESP_OK: Address register written to successfully - ESP_FAIL: Address register write failed because of some error occurred - ESP_ERR_INVALID_ARG: Device address provided is out of range (hardware limits device address to 5 bits)
Related Functions
Found 27 other functions taking a ![]()
phy_802_3_t
argument:
Function
Description
Set MMD address to mmd_addr with function MMD_FUNC_NOINCR and read contents to *data
Set MMD address to mmd_addr with function MMD_FUNC_NOINCR and write data
Performs basic PHY chip initialization
Initializes configuration of parent IEEE 802.3 PHY object infostructure
Reads manufacturer’s model and revision number
Set Ethernet PHY loopback mode
Reads raw content of OUI field
Control autonegotiation mode of Ethernet PHY
Power control of Ethernet PHY
Set Ethernet PHY speed
Reset PHY
Set Ethernet PHY address
Get Ethernet PHY address
Advertise pause function ability
Set Ethernet PHY link status
Hardware reset with internal timing configuration defined during initialization
Set Ethernet PHY duplex mode
Initialize Ethernet PHY
Power off Eternet PHY
Performs hardware reset with specific reset pin assertion time
Performs basic PHY chip de-initialization
Set Ethernet mediator
Retrieve link status and propagate the status to higher layers if the status changed
Write data to MDIO device's memory at address register
Read data of MDIO device's memory at address register
Delete Ethernet PHY infostructure
Reads MDIO device's internal address register