This function handles NMI exception.
This function handles Hard Fault exception.
This function handles Debug Monitor exception.
This function handles Memory Manage exception.
This function handles Bus Fault exception.
This function handles Usage Fault exception.
This function handles SysTick Handler.
This function handles SVCall exception.
This function handles PendSVC exception.
System Clock Configuration The system Clock is configured as follow : System Clock source = PLL (HSE) SYSCLK(Hz) = 100000000 HCLK(Hz) = 100000000 AHB Prescaler = 1 APB1 Prescaler = 2 APB2 Prescaler = 1 HSE Frequency(Hz) = 8000000 PLL_M = 8 PLL_N = 400 PLL_P = 4 VDD(V) = 3.3 Main regulator output voltage = Scale1 mode Flash Latency(WS) = 3
Set LED2 to Blinking mode for an infinite loop (toggle period based on value provided as input parameter).
Function to manage User push-button
Configures User push-button in GPIO or EXTI Line Mode.
Wait for User push-button press to start transfer.
Function called in case of error detected in USART IT Handler
This function configures USARTx Instance.
Function called from USART IRQ Handler when RXNE flag is set Function is in charge of reading character received on USART RX line.
Send Txt information message on USART Tx line (to PC Com port).
Example of User callback in charge of consuming received data.
This function prints user info on PC com port and initiates RX transfer
This function monitors buffer filling indication and calls User callbacks when a buffer is full