Symbols
loading...
Files
loading...
SourceVuSTM32 Libraries and SamplesI2C_TwoBoards_RestartAdvComIT

I2C_TwoBoards_RestartAdvComIT sample

I2C_TwoBoards_RestartAdvComIT is a sample project defining the following symbols:

Most used functions

Name
Location
Summary
This function handles NMI exception.
This function handles Hard Fault exception.
This function handles Debug Monitor exception.
This function handles Memory Manage exception.
This function handles Bus Fault exception.
This function handles Usage Fault exception.
This function handles SysTick Handler.
This function handles SVCall exception.
This function handles PendSVC exception.
Main program
This function is executed in case of error occurrence.
System Clock Configuration The system Clock is configured as follow : System Clock source = PLL (HSE) SYSCLK(Hz) = 84000000 HCLK(Hz) = 84000000 AHB Prescaler = 1 APB1 Prescaler = 2 APB2 Prescaler = 1 HSE Frequency(Hz) = 8000000 PLL_M = 8 PLL_N = 336 PLL_P = 4 PLL_Q = 7 VDD(V) = 3.3 Main regulator output voltage = Scale2 mode Flash Latency(WS) = 2
Flush 8-bit buffer.

Other commonly used symbols

Name
Location
Summary
Internal High Speed oscillator (HSI) value. This value is used by the RCC HAL module to compute the system frequency (when HSI is used as system clock source, directly or through the PLL). Value of the Internal oscillator in Hz
Adjust the value of External High Speed oscillator (HSE) used in your application. This value is used by the RCC HAL module to compute the system frequency (when HSE is used as system clock source, directly or through the PLL). Value of the External oscillator in Hz
Vector Table base offset field. This value must be a multiple of 0x200.
@file I2C/I2C_TwoBoards_RestartAdvComIT/Inc/main.h @author MCD Application Team Header for main.c module @attention Copyright (c) 2017 STMicroelectronics. All rights reserved. This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.
@file I2C/I2C_TwoBoards_AdvComIT/Inc/stm32f4xx_it.h @author MCD Application Team This file contains the headers of the interrupt handlers. @attention Copyright (c) 2017 STMicroelectronics. All rights reserved. This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.
Uncomment the line below to expanse the "assert_param" macro in the HAL drivers code
External clock source for I2S peripheral This value is used by the I2S HAL module to compute the I2S clock source frequency, this source is inserted directly through I2S_CKIN pad. Value of the External oscillator in Hz
tick interrupt priority
Internal Low Speed oscillator (LSI) value.
External Low Speed oscillator (LSE) value. Value of the External Low Speed oscillator in Hz
Time out for HSE start up, in ms
Time out for LSE start up, in ms
@file stm32f4xx_hal_conf.h @author MCD Application Team HAL configuration file. @attention Copyright (c) 2017 STMicroelectronics. All rights reserved. This software is licensed under terms that can be found in the LICENSE file in the root directory of this software component. If no LICENSE file comes with this software, it is provided AS-IS.
This is the list of modules to be used in the HAL driver
This is the HAL system configuration section Value of VDD in mv
Defines related to I2C clock speed
Variables related to Master process
Variables related to Slave process
Defines related to Timeout to keep Leds status
Defines related to Slave process

Dependencies

I2C_TwoBoards_RestartAdvComIT depends on the following libraries: