SourceVu will show references to __HAL_RCC_TIM1_CLK_ENABLE from the following samples and libraries:
Symbols ![]()
loading...
Files ![]()
loading...
__HAL_RCC_TIM1_CLK_ENABLE macro
Enable or disable the High Speed APB (APB2) peripheral clock.
Syntax
#define __HAL_RCC_TIM1_CLK_ENABLE() do { \
__IO uint32_t tmpreg = 0x00U; \
SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
\
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\
UNUSED(tmpreg); \
} while(0U)
Notes
After reset, the peripheral clock (used for registers read/write access) is disabled and the application software has to enable this clock before using it.