src/rp2350/hardware_structs/include/hardware/structs/pads_bank0.h (PicoSDK)

// THIS HEADER FILE IS AUTOMATICALLY GENERATED -- DO NOT EDIT /** * Copyright (c) 2024 Raspberry Pi Ltd. * * SPDX-License-Identifier: BSD-3-Clause */ #ifndef _HARDWARE_STRUCTS_PADS_BANK0_H #define _HARDWARE_STRUCTS_PADS_BANK0_H /** * \file rp2350/pads_bank0.h */ #include "hardware/address_mapped.h" #include "hardware/regs/pads_bank0.h" // Reference to datasheet: https://datasheets.raspberrypi.com/rp2350/rp2350-datasheet.pdf#tab-registerlist_pads_bank0 // // The _REG_ macro is intended to help make the register navigable in your IDE (for example, using the "Go to Definition" feature) // _REG_(x) will link to the corresponding register in hardware/regs/pads_bank0.h. // // Bit-field descriptions are of the form: // BITMASK [BITRANGE] FIELDNAME (RESETVALUE) DESCRIPTION typedef struct { _REG_(PADS_BANK0_VOLTAGE_SELECT_OFFSET) // PADS_BANK0_VOLTAGE_SELECT // Voltage select // 0x00000001 [0] VOLTAGE_SELECT (0) io_rw_32 voltage_select; // (Description copied from array index 0 register PADS_BANK0_GPIO0 applies similarly to other array indexes) _REG_(PADS_BANK0_GPIO0_OFFSET) // PADS_BANK0_GPIO0 // 0x00000100 [8] ISO (1) Pad isolation control // 0x00000080 [7] OD (0) Output disable // 0x00000040 [6] IE (0) Input enable // 0x00000030 [5:4] DRIVE (0x1) Drive strength // 0x00000008 [3] PUE (0) Pull up enable // 0x00000004 [2] PDE (1) Pull down enable // 0x00000002 [1] SCHMITT (1) Enable schmitt trigger // 0x00000001 [0] SLEWFAST (0) Slew rate control io_rw_32 io[48]; } pads_bank0_hw_t; #define pads_bank0_hw ((pads_bank0_hw_t *)PADS_BANK0_BASE) static_assert(sizeof (pads_bank0_hw_t) == 0x00c4, ""); #endif // _HARDWARE_STRUCTS_PADS_BANK0_H