Syntax
#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__) ![]()
![]( "Declaration")
#define TU_LOG_USBH(...) TU_LOG(CFG_TUH_LOG_LEVEL, __VA_ARGS__)![]()
![]()
TU_LOG_USBH("USBH init on controller %u\r\n", rhport);![]()
![]()
TU_LOG_USBH("%s init\r\n", driver->name);![]()
![]()
TU_LOG_USBH("%s deinit\r\n", driver->name);![]()
![]()
TU_LOG_USBH("[%u:] USBH Defer Attach until current enumeration complete\r\n", event.rhport);![]()
![]()
TU_LOG_USBH("[%u:] USBH DEVICE ATTACH\r\n", event.rhport);![]()
![]()
TU_LOG_USBH("[%u:%u:%u] USBH DEVICE REMOVED\r\n", event.rhport, event.connection.hub_addr, event.connection.hub_port);![]()
![]()
TU_LOG_USBH("on EP %02X with %u bytes: %s\r\n", ep_addr, (unsigned int) event.xfer_complete.len, tu_str_xfer_result[event.xfer_complete.result]);![]()
![]()
TU_LOG_USBH("%s xfer callback\r\n", driver->name);![]()
![]()
TU_LOG_USBH("[%u:%u] %s: ", rhport, daddr,![]()
![]()
TU_LOG_USBH("\r\n");![]()
![]()
TU_LOG_USBH("[%u:%u] Control %s, xferred_bytes = %" PRIu32 "\r\n", rhport, daddr, result == XFER_RESULT_STALLED ? "STALLED" : "FAILED", xferred_bytes);![]()
![]()
TU_LOG_USBH("[%u:%u] Control data:\r\n", rhport, daddr);![]()
![]()
TU_LOG_USBH("[%u] Aborted transfer on EP %02X\r\n", daddr, ep_addr);![]()
![]()
TU_LOG_USBH("[%u] Claimed EP 0x%02x\r\n", dev_addr, ep_addr);![]()
![]()
TU_LOG_USBH("[%u] Released EP 0x%02x\r\n", dev_addr, ep_addr);![]()
![]()
TU_LOG_USBH(" Queue EP %02X with %u bytes ... \r\n", ep_addr, total_bytes);![]()
![]()
TU_LOG_USBH("OK\r\n");![]()
![]()
TU_LOG_USBH("[%u:%u] Open EP0 with Size = %u\r\n", usbh_get_rhport(dev_addr), dev_addr, max_packet_size);![]()
![]()
TU_LOG_USBH("HID Get Report Descriptor\r\n");![]()
![]()
TU_LOG_USBH("Set Configuration = %d\r\n", config_num);![]()
![]()
TU_LOG_USBH("Set Interface %u Alternate %u\r\n", itf_num, itf_alt);![]()
![]()
TU_LOG_USBH("[%u:%u:%u] unplugged address = %u\r\n", rhport, hub_addr, hub_port, daddr);![]()
![]()
TU_LOG_USBH(" is a HUB device %u\r\n", daddr);![]()
![]()
TU_LOG_USBH("Get 8 byte of Device Descriptor\r\n");![]()
![]()
TU_LOG_USBH("Get Device Descriptor\r\n");![]()
![]()
TU_LOG_USBH("Get Configuration[0] Descriptor (9 bytes)\r\n");![]()
![]()
TU_LOG_USBH("Get Configuration[0] Descriptor\r\n");![]()
![]()
TU_LOG_USBH("Device configured\r\n");![]()
![]()
TU_LOG_USBH("%s Speed\r\n", tu_str_speed[_dev0.speed]);![]()
![]()
TU_LOG_USBH("Set Address = %d\r\n", new_addr);![]()
![]()
TU_LOG_USBH("Parsing Configuration descriptor (wTotalLength = %u)\r\n", total_len);![]()
![]()
TU_LOG_USBH(" %s opened\r\n", driver->name);![]()
![]()
TU_LOG_USBH("[%u:%u] Interface %u: class = %u subclass = %u protocol = %u is not supported\r\n",![]()
![]()
TU_LOG_USBH("%s set config: itf = %u\r\n", driver->name, itf_num);![]()
![]()
TU_LOG_USBH("HUB address = %u is mounted\r\n", dev_addr);