esp_zb_zcl_metering_srv_cmd_t is only used within esp_zigbee_gateway sample.
Symbols ![]()
loading...
Files ![]()
loading...
esp_zb_zcl_metering_srv_cmd_t enum
Syntax
enum
{
ESP_ZB_ZCL_METERING_SRV_CMD_GET_PROFILE_RESPONSE = 0x00,
ESP_ZB_ZCL_METERING_SRV_CMD_REQUEST_MIRROR,
ESP_ZB_ZCL_METERING_SRV_CMD_REMOVE_MIRROR,
ESP_ZB_ZCL_METERING_SRV_CMD_REQUEST_FAST_POLL_MODE_RESPONSE,
ESP_ZB_ZCL_METERING_SRV_CMD_SCHEDULE_SNAPSHOT_RESPONSE,
ESP_ZB_ZCL_METERING_SRV_CMD_TAKE_SNAPSHOT_RESPONSE,
ESP_ZB_ZCL_METERING_SRV_CMD_PUBLISH_SNAPSHOT,
ESP_ZB_ZCL_METERING_SRV_CMD_GET_SAMPLED_DATA_RESPONSE,
ESP_ZB_ZCL_METERING_SRV_CMD_CONFIGURE_MIRROR,
ESP_ZB_ZCL_METERING_SRV_CMD_CONFIGURE_NOTIFICATION_SCHEME,
ESP_ZB_ZCL_METERING_SRV_CMD_CONFIGURE_NOTIFICATION_FLAG,
ESP_ZB_ZCL_METERING_SRV_CMD_GET_NOTIFIED_MESSAGE,
ESP_ZB_ZCL_METERING_SRV_CMD_SUPPLY_STATUS_RESPONSE,
ESP_ZB_ZCL_METERING_SRV_CMD_START_SAMPLING_RESPONSE,
};
Values
Value
Declared as
Description
= 0x00
Get Profile Response.
This command is used to request the ESI to mirror Metering Device data.
This command is used to request the ESI to remove its mirror of Metering Device data.
RequestFastPollModeResponse command.
This command responses to a ScheduleSnapshot command to confirm whether the requested snapshot schedule has been set up.
This command responses to a TakeSnapshot command to confirm whether the requested snapshot has been accepted and successfully taken.
This command responses to a GetSnapshot command or when a new snapshot is created.
This command responses to a GetSampledData command to send the requested sample data to the client.
Where 'Two Way Mirroring' is being implemented, this command shall be sent to the mirror once the mirror has been created. The command allows a BOMD to provide the operational configuration of the associated Mirror.
Where 'Two Way Mirroring' is being implemented, and a non-default Notification Scheme is to be used, this command shall be sent to the mirror once the mirror has been created.
Where 'Two Way Mirroring' is being implemented, and a non-default Notification Scheme is to be used, the ConfigureNotificationFlags command allows a BOMD to set the commands relating to the bit value for each NotificationFlags#N attribute that the scheme is proposing to use.
The GetNotifiedMessage command is used only when a BOMD is being mirrored. This command provides a method for the BOMD to notify the Mirror message queue that it wants to receive commands that the Mirror has queued.
This command is transmitted by a Metering Device in response to a Change Supply command.
This command is transmitted by a Metering Device in response to a StartSampling command.