esp_zb_zcl_metering_cli_cmd_t enum

GetProfile command.

This command allows the ESI to inform a sleepy Metering Device it has the ability to store and mirror its data.

This command allows the ESI to inform a sleepy Metering Device mirroring support has been removed or halted.

RequestFastPollMode command.

This command is used to set up a schedule of when the device shall create snapshot data.

This command is used to instruct the cluster server to take a single snapshot.

This command is used to request snapshot data from the cluster server.

The sampling mechanism allows a set of samples of the specified type of data to be taken, commencing at the stipulated start time.

This command is used to request sampled data from the server.

This command is sent in response to the ReportAttribute command when the MirrorReporting attribute is set.

This command shall cause the LoadLimitCounter attribute to be reset.

This command is sent to instruct the Metering Device to change the status of the valve or load switch.

This command is intended to be sent from an IHD to a meter as the consequence of a user action on the IHD.

This command is used to specify the required status of the supply following the occurrence of certain events on the meter.

This command is used to update the 'Uncontrolled Flow Rate' configuration data used by flow meters.