uint32_tmask_byte_control2:6;/*These bits are mask control bits for comparison of each of the EMACADDR2 bytes. When set high the MAC does not compare the corresponding byte of received DA or SA with the contents of EMACADDR2 registers. Each bit controls the masking of the bytes as follows: Bit[29]: EMACADDR2 High [15:8]. Bit[28]: EMACADDR2 High [7:0]. Bit[27]: EMACADDR2 Low [31:24]. Bit[24]: EMACADDR2 Low [7:0].You can filter a group of addresses (known as group address filtering) by masking one or more bytes of the address.*/