![]()
#define APPL_TRACE_ERROR(fmt, args...) {if (appl_trace_level >= BT_TRACE_LEVEL_ERROR && BT_LOG_LEVEL_CHECK(APPL, ERROR)) BT_PRINT_E("BT_APPL", fmt, ## args);}![]()
APPL_TRACE_ERROR ("BTA_AgEnable: FAILED, AG already enabled.");![]()
APPL_TRACE_ERROR("%s: osi_malloc() failed allocation", __func__);![]()
APPL_TRACE_ERROR("%s: p_arg is null, send error and return", __func__);![]()
APPL_TRACE_ERROR ("bta_ag_resume_open, Null p_scb");![]()
APPL_TRACE_ERROR("BTA AG is already disabled, ignoring ...");![]()
APPL_TRACE_ERROR("AG evt out of range, ignoring...");![]()
APPL_TRACE_ERROR ("bta_ag_mgmt_cback: PORT_SUCCESS, ignoring handle = %d", port_handle);![]()
APPL_TRACE_ERROR("bta_ag_esco_connreq_cback: Nothing to remove so accept Conn Request (sco_inx 0x%04x)", sco_inx);![]()
APPL_TRACE_ERROR ("bta_av_a2d_sdp_cback, no scb found for handle(0x%x)", bta_av_cb.handle);![]()
APPL_TRACE_ERROR("wait:x%x q_tag:%d- not started", p_scb->wait, p_scb->q_tag);![]()
APPL_TRACE_ERROR ("bta_av_suspend_cfm: suspend failed, closing connection");![]()
APPL_TRACE_ERROR("suspend rejected, try close");![]()
APPL_TRACE_ERROR("reconfig rejected, try close");![]()
APPL_TRACE_ERROR ("failed to start streaming for role management reasons!!");![]()
APPL_TRACE_ERROR("bta_av_rc_create ACP handle exist for shdl:%d", shdl);![]()
APPL_TRACE_ERROR("bta_av_rc_create found duplicated handle:%d", rc_handle);![]()
APPL_TRACE_ERROR("not a valid handle:%d any more", i);![]()
APPL_TRACE_ERROR("rcb[%d].lidx=%d, lcb.conn_msk=x%x",![]()
APPL_TRACE_ERROR("av scb not available for avdt connection");![]()
APPL_TRACE_ERROR("bta_av_co_get_peer peer index out of bounds:%d", index);![]()
APPL_TRACE_ERROR("bta_av_co_audio_disc_res could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_audio_disc_res peer already opened");![]()
APPL_TRACE_ERROR("bta_av_co_audio_cfg_res could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_audio_cfg_res peer already opened");![]()
APPL_TRACE_ERROR("bta_av_audio_sink_getconfig could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_audio_sink_getconfig no more room for SRC info");![]()
APPL_TRACE_ERROR("bta_av_co_audio_getconfig could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_audio_getconfig no more room for SNK info");![]()
APPL_TRACE_ERROR("bta_av_co_audio_setconfig could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_audio_setconfig peer already in use");![]()
APPL_TRACE_ERROR("bta_av_co_audio_setconfig wrong CP configuration");![]()
APPL_TRACE_ERROR("bta_av_co_audio_setconfig unsupported cid %d", bta_av_co_cb.codec_cfg.id);![]()
APPL_TRACE_ERROR("bta_av_co_audio_setconfig could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_audio_close could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_audio_src_data_path Unsupported codec type (%d)", codec_type);![]()
APPL_TRACE_ERROR("bta_av_co_audio_drop dropped: x%x", hndl);![]()
APPL_TRACE_ERROR("bta_av_co_audio_codec_build_config: unsupported codec id %d", bta_av_co_cb.codec_cfg.id);![]()
APPL_TRACE_ERROR("bta_av_co_audio_codec_cfg_matches_caps: unsupported codec id %d", codec_id);![]()
APPL_TRACE_ERROR("bta_av_co_audio_peer_supports_codec: unsupported codec id %d", bta_av_co_cb.codec_cfg.id);![]()
APPL_TRACE_ERROR("peer_src_supports_codec: unsupported codec id %d",![]()
APPL_TRACE_ERROR("bta_av_co_audio_sink_supports_config unsupported codec type %d", codec_type);![]()
APPL_TRACE_ERROR("bta_av_co_audio_sink_supports_config invalid codec type %d", codec_type);![]()
APPL_TRACE_ERROR("bta_av_co_audio_media_supports_config unsupported codec type %d", codec_type);![]()
APPL_TRACE_ERROR("bta_av_co_audio_media_supports_config invalid codec type %d", codec_type);![]()
APPL_TRACE_ERROR("bta_av_co_audio_codec_reset A2D_BldSbcInfo failed");![]()
APPL_TRACE_ERROR("bta_av_co_audio_set_codec PCM channel number unsupported");![]()
APPL_TRACE_ERROR("bta_av_co_audio_set_codec PCM sample size unsupported");![]()
APPL_TRACE_ERROR("bta_av_co_audio_set_codec PCM sampling frequency unsupported");![]()
APPL_TRACE_ERROR("bta_av_co_audio_set_codec A2D_BldSbcInfo failed");![]()
APPL_TRACE_ERROR("bta_av_co_audio_set_codec Feeding format unsupported");![]()
APPL_TRACE_ERROR("bta_av_co_audio_discard_config could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_peer_cp_supported could not find peer entry");![]()
APPL_TRACE_ERROR("bta_av_co_peer_cp_supported did not find SBC sink");![]()
APPL_TRACE_ERROR("Video streaming not supported");![]()
APPL_TRACE_ERROR("Already registered");![]()
APPL_TRACE_ERROR("bad channel: %d\n", chnl);![]()
APPL_TRACE_ERROR("failed to alloc SCB");![]()
APPL_TRACE_ERROR("bta_av_sbc_cfg_for_cap: ch_mode(0x%02X) not supported", p_pref->ch_mode);![]()
APPL_TRACE_ERROR("bta_av_sbc_cfg_for_cap: samp_freq(0x%02X) not supported", p_pref->samp_freq);![]()
APPL_TRACE_ERROR("bta_av_sbc_cfg_for_cap: block_len(0x%02X) not supported", p_pref->block_len);![]()
APPL_TRACE_ERROR("bta_av_sbc_cfg_for_cap: num_subbands(0x%02X) not supported", p_pref->num_subbands);![]()
APPL_TRACE_ERROR("bta_av_sbc_cfg_for_cap: alloc_mthd(0x%02X) not supported", p_pref->alloc_mthd);![]()
APPL_TRACE_ERROR(" bta_av_sbc_cfg_matches_cap Parsing Failed %d", status);![]()
APPL_TRACE_ERROR("%s, malloc failed.", __func__);![]()
APPL_TRACE_ERROR("%s, malloc failed.", __func__);![]()
APPL_TRACE_ERROR("%s(), the callback function can't be NULL.", __func__);![]()
APPL_TRACE_ERROR("%s(), the callback function can't be NULL.", __func__);![]()
APPL_TRACE_ERROR("%s(), the callback function can't be NULL.", __func__);![]()
APPL_TRACE_ERROR ("BTA_DM: Error adding device %08x%04x",![]()
APPL_TRACE_ERROR("unknown device, remove ACL failed");![]()
APPL_TRACE_ERROR("delete device from security database failed.");![]()
APPL_TRACE_ERROR("%s no resources", __func__);![]()
APPL_TRACE_ERROR("No buffer to start DI discovery");![]()
APPL_TRACE_ERROR("%s: Unable to allocate memory for uuid_list", __func__);![]()
APPL_TRACE_ERROR("%s: couldn't allocate memory", __func__);![]()
APPL_TRACE_ERROR("%s: couldn't allocate memory", __func__);![]()
APPL_TRACE_ERROR("#### Failed to allocate SDP DB buffer! ####");![]()
APPL_TRACE_ERROR("%s max active connection reached, no resources", __func__);![]()
APPL_TRACE_ERROR(" %s Device does not exist in DB", __FUNCTION__);![]()
APPL_TRACE_ERROR("Fail to read local device name for EIR");![]()
APPL_TRACE_ERROR("bta_dm_set_eir couldn't allocate buffer");![]()
APPL_TRACE_ERROR("BTA EIR search result, services_to_search=0x%08X, services_found=0x%08X",![]()
APPL_TRACE_ERROR("bta_dm_set_encryption callback is not provided\n");![]()
APPL_TRACE_ERROR("earlier enc was not done for same device\n");![]()
APPL_TRACE_ERROR("%s, not find peer_bdaddr or peer_bdaddr connection state error", __func__);![]()
APPL_TRACE_ERROR ("BTA_DM: Error adding BLE Key for device %08x%04x",![]()
APPL_TRACE_ERROR ("BTA_DM: Error adding BLE Device for device %08x%04x",![]()
APPL_TRACE_ERROR("%s(), fail to set scan params.", __func__);![]()
APPL_TRACE_ERROR("Update connection parameters failed!");![]()
APPL_TRACE_ERROR("Invalid BTA event,can't stop the BLE adverting\n");![]()
APPL_TRACE_ERROR("%s(), fail to set ble adv params.", __func__);![]()
APPL_TRACE_ERROR("%s error: Invalid connection remote_bda.", __func__);![]()
APPL_TRACE_ERROR("%s failed\n", __FUNCTION__);![]()
APPL_TRACE_ERROR("%s failed\n", __FUNCTION__);![]()
APPL_TRACE_ERROR("p_ble_rawdata is NULL");![]()
APPL_TRACE_ERROR("%s out of room to accommodate more service ids ble_raw_size = %d ble_raw_used = %d", __FUNCTION__, bta_dm_search_cb.ble_raw_size, bta_dm_search_cb.ble_raw_used );![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s error:Invalid io cap value.",__func__);![]()
APPL_TRACE_ERROR("%s error:Invalid io cap value.",__func__);![]()
APPL_TRACE_ERROR("%s error:Invalid key size value, key_size =%d",__func__, ble_key_size);![]()
APPL_TRACE_ERROR("%s error:Invalid key size value, key_size =%d",__func__, ble_key_size);![]()
APPL_TRACE_ERROR("Ignore the power mode request: %d", pm_request)![]()
APPL_TRACE_ERROR("bta_dm_pm_sniff BTM_SetPowerMode() returns ERROR status=%d", status);![]()
APPL_TRACE_ERROR("%s hci_status=%d", __func__, p_data->pm_status.hci_status);![]()
APPL_TRACE_ERROR("%s ERROR: 0x%x\n", __func__, status);![]()
APPL_TRACE_ERROR("not enabled or disable in progress");![]()
APPL_TRACE_ERROR("Register with GATT stack failed.\n");![]()
APPL_TRACE_ERROR("Deregister Failed unknown client cif");![]()
APPL_TRACE_ERROR("No resources to open a new connection.");![]()
APPL_TRACE_ERROR("bta_gattc_process_api_open Failed, unknown client_if: %d",![]()
APPL_TRACE_ERROR("No such connection need to be cancelled");![]()
APPL_TRACE_ERROR("Connection already opened. wrong state");![]()
APPL_TRACE_ERROR("Unknown Device, setting rejected");![]()
APPL_TRACE_ERROR("Connection open failure");![]()
APPL_TRACE_ERROR("%s unable to connect to remote bd_addr:%02x:%02x:%02x:%02x:%02x:%02x",![]()
APPL_TRACE_ERROR("bta_gattc_cancel_bk_conn failed");![]()
APPL_TRACE_ERROR("discovery on server failed");![]()
APPL_TRACE_ERROR("unknown device, can not start discovery");![]()
APPL_TRACE_ERROR("bta_gattc_confirm to handle [0x%04x] failed", handle);![]()
APPL_TRACE_ERROR("service change write ccc failed");![]()
APPL_TRACE_ERROR("unexpected operation, ignored");![]()
APPL_TRACE_ERROR("No pending command");![]()
APPL_TRACE_ERROR("expect op:(%u :0x%04x), receive unexpected operation (%u).",![]()
APPL_TRACE_ERROR("operation not supported at current state [%d]", p_clcb->state);![]()
APPL_TRACE_ERROR("%s: received malformed service changed indication, skipping", __func__);![]()
APPL_TRACE_ERROR("%s indication/notif for unknown app", __func__);![]()
APPL_TRACE_ERROR("%s indication/notif for unregistered app", __func__);![]()
APPL_TRACE_ERROR("%s indication/notif for unknown device, ignore", __func__);![]()
APPL_TRACE_ERROR("No resources");![]()
APPL_TRACE_ERROR("bta_gattc_cmpl_cback unknown conn_id = %d, ignore data", conn_id);![]()
APPL_TRACE_ERROR("bta_gattc_init_clcb_conn ERROR: not a connected device");![]()
APPL_TRACE_ERROR("No resources");![]()
APPL_TRACE_ERROR("bta_gattc_listen failed, unknown client_if: %d",![]()
APPL_TRACE_ERROR("Listen failure");![]()
APPL_TRACE_ERROR("deregistration failed, handle is 0");![]()
APPL_TRACE_ERROR("Max Notification Reached, registration failed,see CONFIG_BT_GATTC_NOTIF_REG_MAX in menuconfig");![]()
APPL_TRACE_ERROR("Client_if: %d Not Registered", client_if);![]()
APPL_TRACE_ERROR("%s: deregistration failed, handle is 0", __func__);![]()
APPL_TRACE_ERROR("%s client_if: %d not registered bd_addr:%02x:%02x:%02x:%02x:%02x:%02x",![]()
APPL_TRACE_ERROR("%s registration not found bd_addr:%02x:%02x:%02x:%02x:%02x:%02x",![]()
APPL_TRACE_ERROR("%s invalid uuid len %u", __func__, app_uuid->len);![]()
APPL_TRACE_ERROR("%s status %x", __func__, status);![]()
APPL_TRACE_ERROR("%s status %x", __func__, status);![]()
APPL_TRACE_ERROR("%s services/p_new_srvc is NULL", __func__);![]()
APPL_TRACE_ERROR("Illegal action to add char/descr/incl srvc for non-existing service!");![]()
APPL_TRACE_ERROR("Illegal action to add char/descr/incl srvc for non-existing service!");![]()
APPL_TRACE_ERROR("%s: Illegal action to add descriptor before adding a characteristic!",![]()
APPL_TRACE_ERROR("unknown connection ID");![]()
APPL_TRACE_ERROR("invalid included service handle: [0x%04x ~ 0x%04x]", s_handle, e_handle);![]()
APPL_TRACE_ERROR("service not added, no resources or wrong state, see CONFIG_BT_GATTC_MAX_CACHE_CHAR");![]()
APPL_TRACE_ERROR("No service available, unexpected char discovery result");![]()
APPL_TRACE_ERROR("char not added, no resources, see CONFIG_BT_GATTC_MAX_CACHE_CHAR");![]()
APPL_TRACE_ERROR("invalid start_handle = %d end_handle = %d",![]()
APPL_TRACE_ERROR("GATT service discovery is done on unknown connection");![]()
APPL_TRACE_ERROR("Unknown conn ID: %d", conn_id);![]()
APPL_TRACE_ERROR("server cache not available, CLCB state = %d",![]()
APPL_TRACE_ERROR("No server cache available");![]()
APPL_TRACE_ERROR("%s, No Memory.", __func__);![]()
APPL_TRACE_ERROR("%s INVALID ADDR NUM", __func__);![]()
APPL_TRACE_ERROR("%s cacheOpen failed", __func__);![]()
APPL_TRACE_ERROR("%s cache addr list error", __func__);![]()
APPL_TRACE_ERROR("%s malloc error", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed!", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed!", __func__);![]()
APPL_TRACE_ERROR("%s, Line = %d, nvs flash get blob data fail, err_code = 0x%x", __func__, __LINE__, err_code);![]()
APPL_TRACE_ERROR("%s, Line = %d, nvs flash open fail, err_code = %x", __func__, __LINE__, err_code);![]()
APPL_TRACE_ERROR("%s malloc failed!", __func__);![]()
APPL_TRACE_ERROR("%s, Line = %d, nvs flash open fail, err_code = %x", __func__, __LINE__, err_code);![]()
APPL_TRACE_ERROR("bta_gattc_clcb_dealloc p_clcb=NULL");![]()
APPL_TRACE_ERROR("%s(), the gattc command queue is full.", __func__);![]()
APPL_TRACE_ERROR("%s(), line = %d, alloc fail, no memory.", __func__, __LINE__);![]()
APPL_TRACE_ERROR("%s(), line = %d, alloc fail, no memory.", __func__, __LINE__);![]()
APPL_TRACE_ERROR("can not clear indication/notif registration for unknown app");![]()
APPL_TRACE_ERROR("no available space to mark the bg connection status");![]()
APPL_TRACE_ERROR("%s: Unknown UUID length %d!", __FUNCTION__, p_src->len);![]()
APPL_TRACE_ERROR("BTA GATTS NV register failed.");![]()
APPL_TRACE_ERROR("GATTS not enabled");![]()
APPL_TRACE_ERROR("application already registered.\n");![]()
APPL_TRACE_ERROR("Unable to start app.: Unknown interface =%d",![]()
APPL_TRACE_ERROR("application not registered.");![]()
APPL_TRACE_ERROR("service creation failed.");![]()
APPL_TRACE_ERROR("Application not registered");![]()
APPL_TRACE_ERROR("Sending response failed\n");![]()
APPL_TRACE_ERROR("Unknown connection ID: %d fail sending notification",![]()
APPL_TRACE_ERROR("%s, malloc failed", __func__);![]()
APPL_TRACE_ERROR("%s, incorrect length", __func__);![]()
APPL_TRACE_ERROR("Not an registered servce attribute ID: 0x%04x",![]()
APPL_TRACE_ERROR("bta_gatts_cancel_open failed for open request");![]()
APPL_TRACE_ERROR("Unknown GATTS application");![]()
APPL_TRACE_ERROR("bta_gatts_listen Listen failed");![]()
APPL_TRACE_ERROR("%s failed", __func__);![]()
APPL_TRACE_ERROR("connection request on gatt_if[%d] is not interested", gatt_if);![]()
APPL_TRACE_ERROR("request received on unknown connection ID: %d", conn_id);![]()
APPL_TRACE_ERROR("bta_gatts_conn_cback server_if=%d not found", gatt_if);![]()
APPL_TRACE_ERROR("Allocate fail for %s\n", __func__);![]()
APPL_TRACE_ERROR("%s status %x", __func__, status);![]()
APPL_TRACE_ERROR("%s status %x", __func__, status);![]()
APPL_TRACE_ERROR("service not created\n");![]()
APPL_TRACE_ERROR("%s: Failed to register HID device (%d)", __func__, ret);![]()
APPL_TRACE_ERROR("%s: Failed to deregister HID device (%d)", __func__, ret);![]()
APPL_TRACE_ERROR("%s: Descriptor is too long or malformed", __func__);![]()
APPL_TRACE_ERROR("%s invalid data, remaining_len:%d", __func__, remaining_len);![]()
APPL_TRACE_ERROR("%s invalid data, remaining_len:%d", __func__, remaining_len);![]()
APPL_TRACE_ERROR("%s invalid data, remaining_len:%d", __func__, remaining_len);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem: %s", __func__);![]()
APPL_TRACE_ERROR("No mem: %s", __func__);![]()
APPL_TRACE_ERROR("No mem: %s", __func__);![]()
APPL_TRACE_ERROR("No mem, %s\n", __func__);![]()
APPL_TRACE_ERROR("No mem, %s", __func__);![]()
APPL_TRACE_ERROR("No mem: %s", __func__);![]()
APPL_TRACE_ERROR("BTA HF Client is already enabled, ignoring ...");![]()
APPL_TRACE_ERROR("HFPClient: AT response timeout, disconnecting");![]()
APPL_TRACE_ERROR("%s missing end <cr><lf>", __FUNCTION__); \![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("%s: Format Error %s", __func__, buffer);![]()
APPL_TRACE_ERROR("%s: Format Error %s", __func__, buffer);![]()
APPL_TRACE_ERROR("HFPCient: AT event/reply parsing failed, skipping %d", i);![]()
APPL_TRACE_ERROR("HFPCient: could not skip unknown AT event, disconnecting");![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("HFPClient: AT parser buffer overrun, disconnecting");![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("%s: Remote does not support NREC.", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("No mem %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("Default case, %s", __FUNCTION__);![]()
APPL_TRACE_ERROR("BTA HF Client is already disabled, ignoring ...");![]()
APPL_TRACE_ERROR("HF Client evt out of range, ignoring...");![]()
APPL_TRACE_ERROR("HFPClient: Failed to create SLC due to AT error, disconnecting (%u)",![]()
APPL_TRACE_ERROR("HFPClient: Failed to create SLCdue to unexpected AT command, disconnecting (%u)",![]()
APPL_TRACE_ERROR ("bta_hf_client_mgmt_cback: PORT_SUCCESS, ignoring handle = %d", port_handle);![]()
APPL_TRACE_ERROR("HID_HostWriteDev status:%d", status);![]()
APPL_TRACE_ERROR("No resource to send HID host Connect request.");![]()
APPL_TRACE_ERROR("%s: Error: too many HID devices are connected", __func__);![]()
APPL_TRACE_ERROR("%s malloc failed!", __func__);![]()
APPL_TRACE_ERROR("wrong device handle: [%d], event:%d", p_data->hdr.layer_specific, event - BTA_HH_API_OPEN_EVT);![]()
APPL_TRACE_ERROR("bta_hh_sm_execute: Invalid state State = 0x%x, Event = %d",![]()
APPL_TRACE_ERROR("bta_hh_tod_spt sub_class:0x%x NOT supported", sub_class);![]()
APPL_TRACE_ERROR("get_sec_id_used, sec id exceeds the limit:%d",![]()
APPL_TRACE_ERROR("get_sec_id_used, rfc ctrl block exceeds the limit:%d",![]()
APPL_TRACE_ERROR( "bta_jv_alloc_rfc_cb: port_handle:%d, ctrl block exceeds "![]()
APPL_TRACE_ERROR("bta_jv_free_sr_rfc_cb, p_cb or p_pcb cannot be null");![]()
APPL_TRACE_ERROR("%s unable to free psm 0x%x no more free slots", __func__, psm);![]()
APPL_TRACE_ERROR("rfc channel:%d already in use or invalid", channel);![]()
APPL_TRACE_ERROR("run out of rfc channels");![]()
APPL_TRACE_ERROR("create_base_record: failed to create base service "![]()
APPL_TRACE_ERROR("create_base_record: failed to create base service "![]()
APPL_TRACE_ERROR("create_base_record: failed to create base service "![]()
APPL_TRACE_ERROR("create_base_record: failed to create base service "![]()
APPL_TRACE_ERROR("add_spp_sdp: failed to create sdp record, "![]()
APPL_TRACE_ERROR("add_spp_sdp: failed to register SPP service, "![]()
APPL_TRACE_ERROR("add_spp_sdp: failed to register SPP service, "![]()
APPL_TRACE_ERROR("%s() ls->p_cb->p_cback == NULL", __func__);![]()
APPL_TRACE_ERROR("%s() could not allocate msg buffer", __func__);![]()
APPL_TRACE_ERROR("unknown callout type:%d", type);![]()
APPL_TRACE_ERROR("sec_id:%d is zero or BTM_SetSecurityLevel failed, remote_scn:%d", sec_id, cc->remote_scn);![]()
APPL_TRACE_ERROR("bta_jv_rfcomm_connect, RFCOMM_CreateConnection failed");![]()
APPL_TRACE_ERROR("run out of rfc control block");![]()
APPL_TRACE_ERROR("%s, rfc handle is null", __func__);![]()
APPL_TRACE_ERROR("create new listen port, but upper layer reject connection");![]()
APPL_TRACE_ERROR("no listen port, and upper layer reject connection");![]()
APPL_TRACE_ERROR("bta_jv_add_rfc_port failed to create new listen port");![]()
APPL_TRACE_ERROR("bta_jv_add_rfc_port, open pcb not matching listen one,"![]()
APPL_TRACE_ERROR("bta_jv_add_rfc_port, cannot create new rfc listen port");![]()
APPL_TRACE_ERROR("bta_jv_rfcomm_start_server, run out of sec_id");![]()
APPL_TRACE_ERROR("bta_jv_rfcomm_start_server, RFCOMM_CreateConnection failed");![]()
APPL_TRACE_ERROR("bta_jv_rfcomm_start_server, run out of rfc control block");![]()
APPL_TRACE_ERROR("bta_jv_rfcomm_stop_server, jv handle is null");![]()
APPL_TRACE_ERROR("bta_jv_rfcomm_write :: WARNING ! No JV callback set");![]()
APPL_TRACE_ERROR("No p_cback.");![]()
APPL_TRACE_ERROR("%s() - supported_formats_list - wrong attribute length/type:"![]()
APPL_TRACE_ERROR("%s() - supported_formats_list - count overflow - "![]()
APPL_TRACE_ERROR("%s() - supported_formats_list - wrong sub attribute "![]()
APPL_TRACE_ERROR("%s unable to create alarm.", __func__);![]()
APPL_TRACE_ERROR("warning : no command pending, ignore ack");![]()
APPL_TRACE_ERROR("### A2DP-MEDIA EVENT %u NOT HANDLED ###", ctrl);![]()
APPL_TRACE_ERROR("warning : media task already running");![]()
APPL_TRACE_ERROR("%s unable to start up media thread\n", __func__);![]()
APPL_TRACE_ERROR("btc reset decoder No Buffer ");![]()
APPL_TRACE_ERROR("Insufficient data in que ");![]()
APPL_TRACE_ERROR("ERROR dump_codec_info A2D_ParsSbcInfo fail:%d\n", a2d_status);![]()
APPL_TRACE_ERROR("OI_CODEC_SBC_DecoderReset failed with error code %d\n", status);![]()
APPL_TRACE_ERROR("Decoding failure: %d\n", status);![]()
APPL_TRACE_ERROR("warning : media task already running");![]()
APPL_TRACE_ERROR("%s unable to start up media thread\n", __func__);![]()
APPL_TRACE_ERROR("%s: ERROR min_bitpool > max_bitpool", __FUNCTION__);![]()
APPL_TRACE_ERROR("%s - Avoiding division by zero...", __FUNCTION__);![]()
APPL_TRACE_ERROR("%s - block=%d, subBands=%d, channels=%d", __FUNCTION__,![]()
APPL_TRACE_ERROR("%s could not find bitpool in range", __FUNCTION__);![]()
APPL_TRACE_ERROR("unknown feeding format %d", p_feeding->feeding.format);![]()
APPL_TRACE_ERROR("ERROR btc_get_num_aa_frame Unsupported transcoding format 0x%x",![]()
APPL_TRACE_ERROR ("ERROR btc_media_aa_prep_sbc_2_send no buffer TxCnt %d ",![]()
APPL_TRACE_ERROR("%s unsupported transcoding format 0x%x", __func__, a2dp_source_local_param.btc_aa_src_cb.TxTranscoding);![]()
APPL_TRACE_ERROR("%s() failed - id %d is invalid", __func__, id);![]()
APPL_TRACE_ERROR("%s could not get hci layer interface.\n", __func__);![]()
APPL_TRACE_ERROR("Start HCI Host Layer Failure\n");